| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| How do you determine if you have a V1 filter head unit or V2 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=63514 |
Page 1 of 1 |
| Author: | LANCESR [ Fri Nov 04, 2011 2:35 pm ] |
| Post subject: | How do you determine if you have a V1 filter head unit or V2 |
What do i inspect to figure out if i have a version 1 or 2 fuel filter head unit? I have power loss, rough cold idle, hard to start, while in park and rev engine will not come on "pipe" till over 2000 rpm up until then feels like it is flooded. I think I might have a failed lift pump or air leak in head unit or worse like a turbo. Can anyone help out? Thanks |
|
| Author: | papaindigo [ Fri Nov 04, 2011 3:34 pm ] |
| Post subject: | Re: How do you determine if you have a V1 filter head unit o |
Go to Sams NOOB guide, scroll down to the 2nd item which includes a video on bleeding the fuel head, watch the video which at the end shows the difference. |
|
| Author: | ATXKJ [ Fri Nov 04, 2011 4:45 pm ] |
| Post subject: | Re: How do you determine if you have a V1 filter head unit o |
bbo's picture - look at the plug on the right side ![]() http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=381162#p381162 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|