There's a posting in another part of the forum (http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=4&t=61627) about Ultragauge's ability to work with our CRD... It appears irollgen4s got some success in setting this up, and had it running for a couple of weeks, according to his last post...

Anyone else went ahead and gave it a try?

_________________
RIP 10/31/2012
Green Metallic 2006 CRD Limited
GDE Hot tune ~ Pre-F37 TCM ~ Transgo shift kit ~ MagnaFlow ~ Homemade Provent ~ OME 2" lift & Airlift ~ Samco ~ Euro TC ~ Lift pump ~ Nylon fan blade & Hayden clutch ~ Etc!

Still have mine, though it barely says any useful information. Pretty much, you just have to for the Jeep protocol, and then it works fine. I haven't had any issues with mine and i leave it plugged in constantly.

_________________
06 CRD limited
Frankenlift, JBA 1/4 top plate, 3 clevis rings, 3 stacked iso's
JBA UCA and quick disconnects
Procomp rockkrawlr 16x8 4.25bs with 265-70-65 General Grabber AT2's
Mopar full skid plates, JCR stage 3 Rock Rails
Kenwood HU, 6.5 pioneer marine grade door speakers, JL stealthbox kenwood amp
GDE HOT tune
Soon to come
RL Rock monitor bumper

Thanks for the update! When you mention "barely useful informations", is it because there are not too many gauges that actually work on the UG for the CRD?

_________________
RIP 10/31/2012
Green Metallic 2006 CRD Limited
GDE Hot tune ~ Pre-F37 TCM ~ Transgo shift kit ~ MagnaFlow ~ Homemade Provent ~ OME 2" lift & Airlift ~ Samco ~ Euro TC ~ Lift pump ~ Nylon fan blade & Hayden clutch ~ Etc!

I can't recall off the top of my head, but it has RPM's, hour meter, some temperature gauge that i havent figured out what temperature its for and some other things. it says it has a fuel sensor thing, but when trying to set it up on the ultra gauge it says there is no sensor, so i just leave that alone. I mainly use the hour meter and RPM's.

_________________
06 CRD limited
Frankenlift, JBA 1/4 top plate, 3 clevis rings, 3 stacked iso's
JBA UCA and quick disconnects
Procomp rockkrawlr 16x8 4.25bs with 265-70-65 General Grabber AT2's
Mopar full skid plates, JCR stage 3 Rock Rails
Kenwood HU, 6.5 pioneer marine grade door speakers, JL stealthbox kenwood amp
GDE HOT tune
Soon to come
RL Rock monitor bumper