Good Morning....I just talked with a trailer rental place. I apparently need a brake controller to haul a 6 x 12 trailer for some bulky equipment. Does anyone know if the trailer package on the CRD include the 12 volt wiring for the trailer braking unit?

P>S...just checked the tech section and there isn't anything on brake controllers.....rats!

Thanks,

_________________
Jim

2005 Liberty Sport Stone White
SAMCO Hoses
Provent
HHO System
In-line thermo
'95 Moto Guzzi California 1100

I learn more from my struggles than that which comes easy......

check out viewtopic.php?f=5&t=58583

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Here's another wrtite up that explains things
http://www.jeepkj.com/forum/showthread. ... tite+hitch

If you have the factory installed trailer package then there will 12 volts at the 7 pin plug and a wire labled "brake" by the driver's left kick panel. There's no plug ready for a brake controler though You'll need to run plus and minus 12 volts and hook into the stop light switch

If you have the dealer installed unit it's a toss up what the tech installed when he did it. If you have an EVIC then our good.
See the above link and read it all

_________________
Atlantic Blue 06 CRD Limited (his)
Joined by a 2000 XJ Classic (hers)