| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Skid plates http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=63708 |
Page 1 of 1 |
| Author: | Kgeisler2010 [ Wed Nov 16, 2011 8:10 pm ] |
| Post subject: | Skid plates |
Im sure this has been asked before but couldnt find any thing in the search. Does any one know if the skidrow or any other skid plates will work with my deep transmission pan? |
|
| Author: | ATXKJ [ Wed Nov 16, 2011 9:10 pm ] |
| Post subject: | Re: Skid plates |
Stan was able to disassemble an OEM skid and use the bottom half with his deep pan http://liberty.eurekaboy.com/deeppan.htm considering the OEM skid has more clearance than most aftermarket - I'd bet - no. (I now have a SuperSkid - and there's no extra space, and I bent a stock skid - fairly easily- so they're not great skids) |
|
| Author: | Kgeisler2010 [ Wed Nov 16, 2011 10:03 pm ] |
| Post subject: | Re: Skid plates |
Ok well im mainly wanting to get a skid to cover the oil filter is the transmission skid the one that covers it or a different one |
|
| Author: | arengant [ Thu Nov 17, 2011 7:34 am ] |
| Post subject: | Re: Skid plates |
Transmission will cover it. The OEM one barely covers does, with skid row giving some extra beef/protection in that area... |
|
| Author: | Kgeisler2010 [ Thu Nov 17, 2011 2:45 pm ] |
| Post subject: | Re: Skid plates |
Well I was thinking you think i would to able to put spacers in to make the skid row work? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|