what size tire for stock CRD?

nissanfrontier · **Joined:** Tue Dec 22, 2009 4:09 pm **Posts:** 145

I just ordered 235 70 16 is 235 75 better choice. Posted in wheel and tire section but figure I better talk to CRD users. Tire Hankook dynapro atm rf10. Then if I go max is the tire 245 70 or 245 75. Also yokohama geolander at/s or stick with what I have. I would have looked at general at2 but there backorder maybe I could call and double check supply. Looking at discounttiredirect. Also what came stock 225 75 16 right I thought this was smaller than 235 75? Right now jeep has Liberator tires everyone was getting Walmart. Jeep is gone for week or I would run out and look.

ChesterCRD · **Posted:** Wed Dec 28, 2011 8:36 am

I recommend some searching the forum as there are several threads on tire size. From memory, the stock size is 225/75/R16 and the max without a lift is 235/75/R16. There is front end sag to consider too, so YMMV.

ATXKJ · **Posted:** Wed Dec 28, 2011 8:51 am

do not try 245/75/16 without a lift, you won't be able to turn the wheels.

biggest without a lift is normally 245/70/16
some folks have been okay with 235/75/16
and several like 215/85/16 - although you have to run load E and the weight's a big deal

METCRD · **Posted:** Wed Dec 28, 2011 6:02 pm

I have no lift and 245/70/16. I like the size and have zero rubbing issues. Only issue is now my saggy springs look even more saggy due to the smaller wheel well gap. Good size.

audiboy86 · **Posted:** Wed Dec 28, 2011 7:15 pm

Yah METCRD I see you got some offroad tires so your ready for Utah next year. And you have to bring the hook if you do come.

tonycrd · **Posted:** Thu Dec 29, 2011 9:22 am

On my stock rims, 235/70/16 (=stock tire size!) rub like H..ll on the front stabilizer at full lock...

what size tire for stock CRD?

Who is online