| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Differentials http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=64515 |
Page 1 of 1 |
| Author: | dylan7495 [ Thu Jan 05, 2012 4:41 am ] |
| Post subject: | Differentials |
Good Day, Does anybody know what diffs the 2.8CRD KJ '04 EXPORT TO SOUTH AFRICA came out with. I know it was different from the states versions. And from other export models. Selec-Trac(NP242) Transfer case mated to 5-45RFE transmission. Regards |
|
| Author: | Glend [ Thu Jan 05, 2012 5:13 am ] |
| Post subject: | Re: Differentials |
Hard to see how the Diffs front 30A and the rear Corporate 8.25 would be different, gearing maybe. The Export models that came to Australia ALL had the 30A and Corp 8.25. Gearing sets varied however, some had 3.73 some had 4.11 (those are final drive gear ratios). Good luck - there should (maybe) be a sticker on your rear axle that will confirm it. |
|
| Author: | Pippobug [ Thu Jan 05, 2012 7:26 am ] |
| Post subject: | Re: Differentials |
Dylan, easiest way to find out what you KJ Diff ratios are is to ask a Jeep Dealership for you Bild Sheet, it will state on there and give you all the parts the KJ was buit with. Normally it's free. Fil. |
|
| Author: | dylan7495 [ Thu Jan 05, 2012 10:36 am ] |
| Post subject: | Re: Differentials |
Thanks, e-mailed jeep. They asked for my details and vin number and said they would E-mail it to me. |
|
| Author: | nursecosmo [ Thu Jan 05, 2012 6:56 pm ] |
| Post subject: | Re: Differentials |
dylan7495 wrote: I know it was different from the states versions. I'd say so since there weren't any US versions of the CRD until 2005. |
|
| Author: | dylan7495 [ Fri Jan 06, 2012 2:05 am ] |
| Post subject: | Re: Differentials |
DJJ: Axle - Front, Dana 30/186MM DMF: Axle Ratio - 4.10 DRA: Axle - Rear, Corporate 8.25 DSA: Axle - Anti-Spin Differential As per build sheet |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|