So relatively new crd owner here... 30,000 miles on her. So the preform service light is going off on the information center... Just changed the oil and did the fuel filter. Wondering what it means and how to reset it? Thanks

Searched Google with this: reset (service or maintenance) code jeep liberty

First item at the top of the list: http://answers.yahoo.com/question/index ... 201AA1kTL6

Power of the internet, thanks to Al Gore...

"Best Answer - Chosen by Asker

Look up at the EVIC. There should be a button that says "STEP" press that until you get to "0 miles till service" comes up. Then just press "RESET" that's all there is to it. It is in your owners manual.
Source(s):
Certified Chrysler Jeep and Dodge tech
3 years ago"

; ' ) Mark

_________________
--
2005 Liberty CRD
2004.5 Cummins 5.9L TD, F1s, NV5600 6-speed in a '93 GMC Suburban

Welcome. If you have not already done so go to Sir Sam's NOOB guide and read thru it and while there download the 05 and 06 Factory service manuals. You need both to get the illustration keys only the 05 has and the diesel cooling system data and diagnostic codes and steps only the 06 has. If you don't have or think you don't have the Owner's manual open the glove box and look at the top shelf; if it's not there download a copy of that too.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs