are the CRD & gasser front struts the same ? I was told that they are different, yet I can't find a strut specific for the CRD.
While I'm at it.....same question for the rear shocks....are they the same or different ?

The CRDs use a heavier spring shock combo up front and the rear is the same as the gassers.

_________________
My CRD Build Thread
Soon to Come:more lights

The front springs are stronger for the CRD, but Bilstein only makes one version damper for both. Use them front and rear. Work great, best value.

DOC

_________________
2005 KJ CRD Ltd Detroit TrueTrac Bilsteins G2 GDE "HOT" ECU GDE TCM "Tow Tune" "euro" TC SEGR Weeks Elbow New HG at 130K ARPs Clean CAT aFe Filter Magnaflow Exhaust EHM Cumminos In-Tank Lift Pump Hayden Fan Clutch Nylon Fan VH Enabled with GDE lower shutoff point Recalibrated Temp Gauge Tekonsha Prodigy Sears P-1 ZDDP

I have both front struts for you.They are the ones that came off mine when I put on bilstein shocks all the way around.
Jeep had around 105,000 miles on it when I did it.Everyone can chime in and say what they think they're worth and that is what you can have them for.Let me know if you're interested.
wayne

Go with OME or bilsten. OME SHOCKS are what I run all the way around and the only ones I trusted under the front of a CRD. Go with the heaviest set up available from either since you do have a CRD.

_________________
My CRD Build Thread
Soon to Come:more lights

Love the Bilsteins remember its all physics and Bilsteins have a 46mm piston alittle firmer but alittle safer!

_________________
2005 Jeep Liberty CRD D3500 Torque Converter
Tru Trac Rear Diff GDE Eco Tune and Trans Tune
H&R Springs Hella headlights and foglights
Rigid Industries Specter series Led light
Bilsteins P245/75/16 LTX MS2 Michelins Samcos
Perimeter alarm and Smith & Wesson M&P .40
I live by Detroit !