one of mine is shot for sure and is rattling around like crazy as well as popping on turning, and i think the other is bad, but they'll both be replaced regardless. Where is the most reliable place i can get these? i know about the chinese manufacturing issue where the axles are shorter then they should be but napa is out of the way for me and would rather order on line.

also, should i replace the intermediate shaft while the cv's are being done? the cv's and intermediate shaft are all stock with over 160k on them

_________________
06 CRD limited
Frankenlift, JBA 1/4 top plate, 3 clevis rings, 3 stacked iso's
JBA UCA and quick disconnects
Procomp rockkrawlr 16x8 4.25bs with 265-70-65 General Grabber AT2's
Mopar full skid plates, JCR stage 3 Rock Rails
Kenwood HU, 6.5 pioneer marine grade door speakers, JL stealthbox kenwood amp
GDE HOT tune
Soon to come
RL Rock monitor bumper

You know napa has a website you can order from right?

http://www.napaautoparts.com/Catalog/Re ... tk=Keyword

X2 plus there was a relatively recent post (my bad I usually copy and save such useful information) that provided a link to a place that sells rebuild kits for the joint that several members have used with apparent success.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

awesome! didn't even think of checking that, thanks! Any input on the intermediate shaft? I think it should be replaced, but i'm entirely unsure.

_________________
06 CRD limited
Frankenlift, JBA 1/4 top plate, 3 clevis rings, 3 stacked iso's
JBA UCA and quick disconnects
Procomp rockkrawlr 16x8 4.25bs with 265-70-65 General Grabber AT2's
Mopar full skid plates, JCR stage 3 Rock Rails
Kenwood HU, 6.5 pioneer marine grade door speakers, JL stealthbox kenwood amp
GDE HOT tune
Soon to come
RL Rock monitor bumper

I am going to post up for audioboy again, he takes the napa units and grinds down the head so they won't bind. You got a pretty beefed up rig irollgen4, and I am going out on a limb here and guessing you wheel a lot

I think they are like 400 bucks but you can return the core.

_________________


05 CRD Sport Dark Kahki

RRO: Adventure Rack/Rails ** MOPAR: Skids/Renny Flares & 255/75r17 (32.1) BFG M/T on JK wheels ** ARB: Bumper/IPF lights/790/948/shocks ** GDE: TCM/Hot Tune ** ROCKLIZARD: Super Sliders/Komodo Bumper

My Build Thread
US Army Infantry

i might have to check into those again. I'm at 22" from the hub to bottom of the flares all around, so i think i'm okay with normal CV's with no binding. Sadly i don't get to wheel it as much as i'd like to. There's virtually no legal trails on Long Island, and the ones that we do run are so narrow that they destroy the paint with scratches and dings. I like keeping my stuff shiny so i avoid those trails most of the time.

_________________
06 CRD limited
Frankenlift, JBA 1/4 top plate, 3 clevis rings, 3 stacked iso's
JBA UCA and quick disconnects
Procomp rockkrawlr 16x8 4.25bs with 265-70-65 General Grabber AT2's
Mopar full skid plates, JCR stage 3 Rock Rails
Kenwood HU, 6.5 pioneer marine grade door speakers, JL stealthbox kenwood amp
GDE HOT tune
Soon to come
RL Rock monitor bumper