This might be a dumb question. Let's say, hypothetically, that a person were to have dropped their MAP sensor while cleaning it (most likely overcome with excitement at being a new CRD owner ) and part of the protective plastic cage that surrounds the sensor broke off, is this a part that can be just easily swapped out?

_________________
2005 CRD Sport
Samco hoses, GDE Ecotune, Fumoto drain valve
Winter mods: air box snorkel removed, front grill covered, viscous fan and clutch removed

Go buy a new one, you do not want parts coming off it getting in to the engine.

_________________
2006 Jeep Liberty CRD
1998 Beetle TDI Malone Tuning Stage 2
2001 Dodge Cummins
2005 Dodge Cummins
ASE, OBDII / VAG-CAN scaner / Service Manual

X2. My parts notes say MAP (manifold absolute pressure - called air temperature/boost pressure sensor in parts manual) sensor (back top of engine under wiring harness) old # 5140331AA new # 68031593AA . Looks to be about $100+shipping on line.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Part is ordered. That was a pricey, stupid little mistake.

_________________
2005 CRD Sport
Samco hoses, GDE Ecotune, Fumoto drain valve
Winter mods: air box snorkel removed, front grill covered, viscous fan and clutch removed

Funny how expensive the little ones can be as I well know from past experience.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

You can buy it in regular auto shop.

Original MAP sensor for Liberty is made by BOSH and Bosh part number is 0 281 002 437 .

Buy it from Summit Racing for $65,95 instead of the Mopar part number 68031593AA from the Jeep dealer for $100.00

http://www.summitracing.com/parts/BCH-0281002437/

_________________
'06 Jeep Liberty (EU Cherokee) 2.8 CRD 120kW - SEGR - Fumoto - viscous heater off - Hardi inline lift pump - DrakeBox2 performance chip - EVIC added - HVAC controls modded - inline thermo - SOLD

'09 Jeep Patriot 2.0 CRD