| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Confirming the M1-301 is correct for an oversize filter http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=67011 |
Page 1 of 1 |
| Author: | kissfan79 [ Tue May 22, 2012 2:00 pm ] |
| Post subject: | Confirming the M1-301 is correct for an oversize filter |
I just changed the oil in the Jeep (can't wait to get the UOA back on it) and I switched to the Mobil1 M1-301 oil filter for more oil volume. It screwed right on. I added an even 7qts of 5w-40 TDT oil instead of the 6.4qts. After checking the oil on the dipstick.....it definately was higher on the dipstick than with a stock filter with 6.4qts. Usually the oil came up to and just covered the "M" on "Min". Now with the oversize filter and the 7qts it is about 1/8" below the max line which I thought would be a bit too high. Is that level ok or should I drain a bit out? Thanks, Jim |
|
| Author: | CATCRD [ Tue May 22, 2012 6:24 pm ] |
| Post subject: | Re: Confirming the M1-301 is correct for an oversize filter |
That's fine, I wouldn't worry about it. |
|
| Author: | racertracer [ Tue May 22, 2012 9:59 pm ] |
| Post subject: | Re: Confirming the M1-301 is correct for an oversize filter |
M1-301 with 7qts works. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|