| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What is the adapter for the water pump and do I need it? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=69526 |
Page 1 of 1 |
| Author: | kissfan79 [ Tue Jul 10, 2012 12:16 pm ] |
| Post subject: | What is the adapter for the water pump and do I need it? |
Hey guys..... I'm getting ready to order the parts for my timing belt change from Moparonline parts.com and they show a water pump adapter for $95.45. Is it necessarry to purchase this for changing the water pump or do I just need the water pump itself? Thanks! Jim |
|
| Author: | jeepdan [ Tue Jul 10, 2012 1:20 pm ] |
| Post subject: | Re: What is the adapter for the water pump and do I need it? |
You do not need to buy the adapter that fastens onto the back of the pump unless you would be unlucky enough to break it It is $550- $760, not $95.00 ![]() Buy the water pump gasket that goes between the adapter and the pump though, If I remember right it wasn't included with the pump. The O-ring between the block and pump will come with the pump. The illustration use to list another (larger 0-ring) which fits between the water pump back housing and the front assy. With it, you can replace only the front of pump like any other water pump that I have changed, cutting Remove/Replace time considerably. |
|
| Author: | kissfan79 [ Tue Jul 10, 2012 1:41 pm ] |
| Post subject: | Re: What is the adapter for the water pump and do I need it? |
Thanks for the reply. OUCH! Thats a bit of a price difference than the one quoted online. I did order the gasket and the o-ring for the water pump. Looks like I'll have an extra o-ring....o well thats ok. Jim |
|
| Author: | papaindigo [ Tue Jul 10, 2012 2:05 pm ] |
| Post subject: | Re: What is the adapter for the water pump and do I need it? |
Take a look at Sir Sam's write up on water pump replacement by removal and replacement of only the front 1/2 which is where all the moving parts are. Vast timesaver as WP bolts are nearly impossible to access. |
|
| Author: | Rich [ Tue Jul 10, 2012 2:30 pm ] |
| Post subject: | Re: What is the adapter for the water pump and do I need it? |
http://www.factorymoparparts.com/jeli2ditikit.html Contains all you need, sans the tools. |
|
| Author: | striperman36 [ Tue Jul 10, 2012 3:04 pm ] |
| Post subject: | Re: What is the adapter for the water pump and do I need it? |
idparts has a kit too. |
|
| Author: | kissfan79 [ Tue Jul 10, 2012 6:09 pm ] |
| Post subject: | Re: What is the adapter for the water pump and do I need it? |
Thanks for the replies and the link. Per Papaindigo's suggestion....I ordered the timing belt from Amazon.com for $73 a while back so I already have the belt itself. I ordered the water pump, tensioner pully, 2 idler pullies, WP o-ring, WP gasket, timing belt cover gasket, and the WP by-pass hose for $426 shipped. Jim |
|
| Author: | moto-scoot [ Fri Jul 13, 2012 2:03 am ] |
| Post subject: | Re: What is the adapter for the water pump and do I need it? |
papaindigo wrote: Take a look at Sir Sam's write up on water pump replacement by removal and replacement of only the front 1/2 which is where all the moving parts are. Vast timesaver as WP bolts are nearly impossible to access. anyone have a link to this writeup? |
|
| Author: | papaindigo [ Fri Jul 13, 2012 6:25 am ] |
| Post subject: | Re: What is the adapter for the water pump and do I need it? |
It's linked off the advanced section of Sir Sam's NOOB guide thru a forum post. But the direct link is http://colorado4wheel.com/content/KJ_TB.html |
|
| Author: | moto-scoot [ Fri Jul 13, 2012 12:38 pm ] |
| Post subject: | Re: What is the adapter for the water pump and do I need it? |
THANKS!! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|