2005 Khaki CRD Limited Parting out FULL VEHICLE

geordi · **Posted:** Tue Sep 18, 2012 5:38 pm

Full interior Khaki cloth and power driver's seat available, NO DENTS in any of the body panels or doors or anything else.

Renegade Lights - LOTS of interest, sale on hold pending rolling body sale.
Chrome grille - Possibly sold, but on hold pending rolling body sale
Aluminum wheels (2 with new tires) - Possibly sold, but on hold pending rolling body sale
Transmission and upgraded torque converter (55k miles) - On hold (Still up for offer) pending rolling body sale
Transfer case (50k miles) - On Hold (Still up for offer) pending rolling body sale

Complete engine available except for block / pistons - threw #4 cylinder through the block. Yay.

I am happy to sell the cylinder heads separately - ALL ENGINE PARTS ARE FOR SALE, I don't think any of that will go with the rolling body. What would go with the body is the transmission and transfer case and the block. Everything else under the hood is up for grabs.
Multiples of many parts available from previous spares collection
BRAND NEW water pump
TWO valve covers with cams in great condition
TWO FULL SETS of injectors (one set recently inspected / tested by Bosch shop)
TWO Cylinder heads complete with valves (One recently tested perfect for valve seating)
TWO Fuel rail sets with sensors never removed
TWO EGR valves with coolers

GDE Transmission tune - WAY too much interest, Ebay auction coming soon (link will appear here)
Dodge Ram Transmission tune - SOLD pending payment
GDE ECO-tuned computer - will need to be reprogrammed by GDE to your VIN.
ALL interior components available - airbags, computers, dash, interior plastic, EVIC... Everything. - ON HOLD, pending rolling body sale

Etecno Steel 7v metal glow plugs (4 - will sell only as a full set, $150 shipped)
Stock Ceramic Glow Plugs 7v, 3 available, $30 each plus $5 shipping (combined if you buy more than one)
FULL SET of GENUINE VM rocker arms and lifters, the updated design: $420 shipped
FULL SET of Genuine VM rocker arms and lifters, (used but all tested perfect) $300 shipped
More items and prices to come.

PICTURES! This album is of everything I have located so far. See something you like? It could be yours! As before, the engine parts are the main thing for sale right now, the rolling body is on hold for a few days, but I am happy to get your PM and I will save your requests (and order in line) for when a decision is made.

https://www.dropbox.com/sh/c0npjrm81kuwgxx/t0V1RQfnQK

Call or message anytime, 561-245-1563 and pictures available upon request. I will probably create an album of images of everything once I break down some of the bigger parts.

All parts are located in Savannah, Georgia, or can be shipped USPS. I can accept credit cards, but my best friends bring me cash.

jlgail4309 · **Posted:** Tue Sep 18, 2012 9:35 pm

Do you have any prices yet.

Tony P. · **Posted:** Tue Sep 18, 2012 10:04 pm

Pm sent.

geordi · **Posted:** Wed Sep 19, 2012 12:47 am

jlgail4309 wrote:

Do you have any prices yet.

For what parts? I'm fairly open to offers on just about anything right now.

tommudd · **Posted:** Wed Sep 19, 2012 1:37 am

PM'd ya

MtnClimber · **Posted:** Wed Sep 19, 2012 12:08 pm

sent you a pm

DynoPax · **Posted:** Wed Sep 19, 2012 1:05 pm

PM Sent...

flash7210 · **Posted:** Wed Sep 19, 2012 1:22 pm

Pm sent.

geordi · **Posted:** Wed Sep 19, 2012 1:39 pm

Holy PM flood Batman!

Ok - I need to give this a thought as to how to do it fairly, there has been a ton of interest on just a couple key parts.

First things first: The interior and the renegade lights *might* be staying with the chassis, if the member who wrecked his CRD in the last couple days wants to make a deal for the rolling chassis. It wouldn't be right to give him a vehicle with holes in the roof. I am not saying no, just not -quite- yet on those. Everyone that has sent a message interested in something will get a reply, but I don't have the time right this second. As usual, I am just about to leave to drive to a gig, but I will be online when I am not driving, so I will work on a list of who wants what (and who was first asking) and get back to everyone individually.

The key things that everyone is piling on for: The renegade light bar and the GDE TCM. I am going to hold on the Rene Bar until I know what is happening with the body, same for the EVIC and the rest of the interior. Hopefully that will be resolved in about a week, based on the timeline that my own family had with an insurance totaling a vehicle.

At the moment, the Dodge Ram TCM is sold, pending payment. I think for the GDE TCM, it might be fairer to do an Ebay auction for that one item, give everyone a shot at it? I hate Ebay fees, but I know I hate when I miss something by just a minute or two, and let me tell you - these PMs are right on top of each other with the time stamps.

For everything else: Pictures are coming! I will update the first post with the link to a Dropbox Photo Album, and everything I can think of will be pictured there. If you want more detailed images, just ask. I will be back here most likely on Sunday to start getting more images.

Thanks for helping me out, honestly. I'm disappointed in this engine design, but never disappointed in this group.

ChooChooman74 · **Posted:** Fri Sep 21, 2012 7:09 pm

Turbo available?

Sent from my DROID BIONIC using Tapatalk 2

racertracer · **Posted:** Fri Sep 21, 2012 7:19 pm

Jim i need the oem hitch and the metal gp. let me lnow.

sota · **Joined:** Fri Aug 07, 2009 7:44 pm **Posts:** 379

please, please, PLEASE...

cupholder insert?

geordi · **Posted:** Sat Sep 22, 2012 12:14 am

sota wrote:

please, please, PLEASE...

cupholder insert?

Sorry, I'm confused. Cupholder insert? You mean the rubber thing?

sota · **Joined:** Fri Aug 07, 2009 7:44 pm **Posts:** 379

yes.
mine's missing and i'm tired of my drinks bouncing around in there.

4x4kingx889 · **Joined:** Sun Jul 17, 2011 6:42 pm **Posts:** 235

What color is the inside?

jlgail4309 · **Posted:** Sun Sep 23, 2012 10:20 pm

What our you asking for the rolling truck with the transmission and transfer case.

geordi · **Posted:** Mon Sep 24, 2012 12:00 am

Hey everyone - I haven't forgotten about you yet!

The interior color is not tan or grey... To me, it seems like something in between. As there might be another shot at selling the rolling body, I hope to have either a decision on that option done this week, then the actual parting can begin.

For anyone wondering: If the rolling body sells, then the GDE eco tune should go with it, because that is mated to the body computer and would actually start an engine. The Renegade lights would also go (I know, everyone wants those!) but it would leave holes in the roof to remove them.

Soon, I hope to have something worked out on this. For any of the engine parts in the pictures, THOSE I am happy to sell off, and will be sending messages to the people who expressed interest in the order they sent their PMs. Not everything is spoken for, so if you see something you want, send me a PM! Just about everything that would normally exist under the hood / in the engine compartment is up for grabs, no matter what happens!

FYI: I only have the first-generation fuel manager head, sorry.

Sir Sam · **Posted:** Mon Sep 24, 2012 11:09 am

So what are you asking for the vehicle as is?

geordi · **Posted:** Mon Sep 24, 2012 12:20 pm

Hey Sam - As the man who does all the rebuilds, I was actually going to be contacting you soon, depending on what happens with the other member.

I was thinking $5000 for the rolling body, and that is complete except for the parts directly attached to the block. It would also (I guess it has to) include the front tow bar setup, so it is ready to be pulled wherever. Both driveshafts would be removed so there is NO chance of damage to the transmission or transfer case.

MtnClimber · **Posted:** Fri Sep 28, 2012 12:42 pm

Any updates on the status of the available parts?

2005 Khaki CRD Limited Parting out FULL VEHICLE

Who is online