| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Wanting a Damaged CRD Block http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=72303 |
Page 1 of 1 |
| Author: | audiboy86 [ Mon Oct 29, 2012 5:14 pm ] |
| Post subject: | Wanting a Damaged CRD Block |
I am hunting for a damaged unrepairable 2.8L CRD block all I really want on it are the head studs if they aren't in to bad a shape. I am willing to negotiate any price that isn't to over the top. |
|
| Author: | LMWatBullRun [ Tue Oct 30, 2012 4:16 pm ] |
| Post subject: | Re: Wanting a Damaged CRD Block |
audiboy86 wrote: I am hunting for a damaged unrepairable 2.8L CRD block all I really want on it are the head studs if they aren't in to bad a shape. I am willing to negotiate any price that isn't to over the top. This head is attached with TTY head bolts, not studs...... |
|
| Author: | papaindigo [ Tue Oct 30, 2012 4:32 pm ] |
| Post subject: | Re: Wanting a Damaged CRD Block |
I'm not sure TTY bolts can be reused but geordi may have a set with virtually no miles on them (used like 5 minutes before the bottom of his engine self destructed) |
|
| Author: | LMWatBullRun [ Wed Oct 31, 2012 7:05 am ] |
| Post subject: | Re: Wanting a Damaged CRD Block |
Although 'they' say you cannot, I confess that I have, with gas engines, and have had good results. I have not with diesels, as the compression and chamber pressures are much higher, and I usually use ARP studs when redoing HGs. That said, I have a supply of bolts. If you want em, PM me. |
|
| Author: | Joe Romas [ Wed Oct 31, 2012 7:22 am ] |
| Post subject: | Re: Wanting a Damaged CRD Block |
papaindigo wrote: I'm not sure TTY bolts can be reused but geordi may have a set with virtually no miles on them (used like 5 minutes before the bottom of his engine self destructed) They are strictky one shot. Have you ever put a cylinder head on something like a VW 1600cc diesel and gone through the tightening process  They are actually strtetched 
|
|
| Author: | audiboy86 [ Wed Oct 31, 2012 7:59 am ] |
| Post subject: | Re: Wanting a Damaged CRD Block |
I think there has been some miss interpretation of what I want. I want a damaged CRD block with the TTY bolts nothing else. I do not want just the bolts and I will not be reusing either of these items in a vehicle. |
|
| Author: | LMWatBullRun [ Wed Oct 31, 2012 2:31 pm ] |
| Post subject: | Re: Wanting a Damaged CRD Block |
audiboy86 wrote: I think there has been some miss interpretation of what I want. I want a damaged CRD block with the TTY bolts nothing else. I do not want just the bolts and I will not be reusing either of these items in a vehicle. So, no sleeves, no crank or bearings, no pistons, no accessories or any head components, just the bare CI block and the bolts? |
|
| Author: | audiboy86 [ Wed Oct 31, 2012 2:45 pm ] |
| Post subject: | Re: Wanting a Damaged CRD Block |
Correct all I want is the block and stud/bolts and really don't need them just prefer to have them. |
|
| Author: | audiboy86 [ Fri Nov 02, 2012 4:18 pm ] |
| Post subject: | Re: Wanting a Damaged CRD Block |
Anyone have any ideas on where I could get one? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|