| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Best place to order Righthand Side Front Axle (complete)??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=72801 |
Page 1 of 1 |
| Author: | DarbyWalters [ Mon Dec 10, 2012 5:54 pm ] |
| Post subject: | Best place to order Righthand Side Front Axle (complete)??? |
CV Boot is torn and need to just replace the righthand axle...Where is the best online price on these parts these days? Thanx...Wally |
|
| Author: | papaindigo [ Mon Dec 10, 2012 8:54 pm ] |
| Post subject: | Re: Best place to order Righthand Side Front Axle (complete) |
IIRC NAPA is your best bet |
|
| Author: | Drewd [ Mon Dec 10, 2012 10:29 pm ] |
| Post subject: | Re: Best place to order Righthand Side Front Axle (complete) |
Napa, they sell remanufacturered axles. Other vendors often sell new axles made in China and they are not the correct size. I put a new napa front pax side axle on my Jeep this past summer and am 100% happy with it. Sorry, can't recall how much it costs. |
|
| Author: | DarbyWalters [ Tue Dec 11, 2012 11:36 am ] |
| Post subject: | Re: Best place to order Righthand Side Front Axle (complete) |
NAPA does not carry the ones for the CRDs different than the 3.7Ls... |
|
| Author: | tjkj2002 [ Tue Dec 11, 2012 12:14 pm ] |
| Post subject: | Re: Best place to order Righthand Side Front Axle (complete) |
DarbyWalters wrote: NAPA does not carry the ones for the CRDs different than the 3.7Ls... But the same as the 2.4 gas KJ if I remember correctly. |
|
| Author: | DarbyWalters [ Tue Dec 11, 2012 3:51 pm ] |
| Post subject: | Re: Best place to order Righthand Side Front Axle (complete) |
tjkj2002 wrote: DarbyWalters wrote: NAPA does not carry the ones for the CRDs different than the 3.7Ls... But the same as the 2.4 gas KJ if I remember correctly. Maybe since they are both inline 4's...Thanx, I will check |
|
| Author: | Drewd [ Sun Dec 16, 2012 1:23 pm ] |
| Post subject: | Re: Best place to order Righthand Side Front Axle (complete) |
Whatever NAPA sold me worked perfectly. I double checked and measured it against the old axle and they were identical in length. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|