| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 2005 crd liberty won't crank http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=72846 |
Page 1 of 1 |
| Author: | maxximr [ Thu Dec 13, 2012 4:59 pm ] |
| Post subject: | 2005 crd liberty won't crank |
hi my jeep won't crank and I'm getting a p0610 code, any ideas? starter is new, battery is fine. everything else should be fine too @rotarii |
|
| Author: | papaindigo [ Thu Dec 13, 2012 5:55 pm ] |
| Post subject: | Re: 2005 crd liberty won't crank |
That's a strange code to get all of a sudden as it's saying your automatic tranny is coded as a manual which is an ECU "thing" that Kieth at GDE knows about and can probably fix if real. Assuming when you turn the key nothing happens in the way of an attempt to start then the "rod" from the key under the steering column to the ignition switch is probably broken. See viewtopic.php?f=5&t=61233&p=678574&hilit=+brother#p678574 |
|
| Author: | maxximr [ Thu Dec 13, 2012 6:58 pm ] |
| Post subject: | Re: 2005 crd liberty won't crank |
papaindigo wrote: That's a strange code to get all of a sudden as it's saying your automatic tranny is coded as a manual which is an ECU "thing" that Kieth at GDE knows about and can probably fix if real. Assuming when you turn the key nothing happens in the way of an attempt to start then the "rod" from the key under the steering column to the ignition switch is probably broken. See viewtopic.php?f=5&t=61233&p=678574&hilit=+brother#p678574 hmm, odd, but when I plug in an ecm from a different crd, it cranks and even starts for a few seconds. so I assume something is wrong with the ecm? @rotarii |
|
| Author: | MRausch82 [ Thu Dec 13, 2012 7:07 pm ] |
| Post subject: | Re: 2005 crd liberty won't crank |
maxximr wrote: papaindigo wrote: That's a strange code to get all of a sudden as it's saying your automatic tranny is coded as a manual which is an ECU "thing" that Kieth at GDE knows about and can probably fix if real. Assuming when you turn the key nothing happens in the way of an attempt to start then the "rod" from the key under the steering column to the ignition switch is probably broken. See viewtopic.php?f=5&t=61233&p=678574&hilit=+brother#p678574 hmm, odd, but when I plug in an ecm from a different crd, it cranks and even starts for a few seconds. so I assume something is wrong with the ecm? @rotarii ...would seem that way to me... Start looking there. |
|
| Author: | Hexus [ Thu Dec 13, 2012 10:41 pm ] |
| Post subject: | Re: 2005 crd liberty won't crank |
It's my understanding that your ECU has to be tuned with your injector codes, Keith at GDE would definitely know more than I, but I know I had to write down all the injector codes on mine when I got the tune, and it's required, so I'm surprised another ECU will crank it and run right, but yeah, definitely sounds like an ECU issue. |
|
| Author: | Billwill [ Fri Dec 14, 2012 3:35 am ] |
| Post subject: | Re: 2005 crd liberty won't crank |
What happens if you jumper out the Starter Relay? The ECU will stop the Starter relay from energizing if it is not happy with some inputs but the fact that it works with another ECU does point to a bad ECU. With the new ECU installed...it probably only runs for a few seconds because the SKIS code does not match. 
|
|
| Author: | maxximr [ Fri Dec 14, 2012 4:46 am ] |
| Post subject: | Re: 2005 crd liberty won't crank |
Billwill wrote: What happens if you jumper out the Starter Relay? The ECU will stop the Starter relay from energizing if it is not happy with some inputs but the fact that it works with another ECU does point to a bad ECU. With the new ECU installed...it probably only runs for a few seconds because the SKIS code does not match. how do I jumper out of the starter relay? and is there any way to get those inputs fixed by myself? @rotarii |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|