| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| need a ecm http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=73048 |
Page 1 of 1 |
| Author: | steelhorse [ Sun Dec 30, 2012 11:28 am ] |
| Post subject: | need a ecm |
looks like my ecm went out.. had a local shop check it out to be sure..anyone know where I can have mine repair or have a good one for sale for a 2005 all stock |
|
| Author: | Rich [ Sun Dec 30, 2012 2:34 pm ] |
| Post subject: | Re: need a ecm |
Only have a spare TCM, but remember you will need to get any new ECM flashed with your injector codes before it will work. How did your ECM go out? |
|
| Author: | steelhorse [ Sun Dec 30, 2012 3:24 pm ] |
| Post subject: | Re: need a ecm |
made a couple of beping sounds and died |
|
| Author: | CATCRD [ Mon Dec 31, 2012 12:02 am ] |
| Post subject: | Re: need a ecm |
Rich wrote: Only have a spare TCM, but remember you will need to get any new ECM flashed with your injector codes before it will work. How did your ECM go out? It will work without the specific injector codes. That just makes it run smoother by balancing their individual flow rates. |
|
| Author: | DOC4444 [ Mon Dec 31, 2012 1:03 am ] |
| Post subject: | Re: need a ecm |
CAT is absolutely correct, but your VIN needs to be programmed in for a replacement (new or used) to work at all. I would speak to GDE and possibly send yours to them to be sure. They sometimes have used ones available. Also, you need to determine what killed yours and fix that so you do not fry the next one. DOC |
|
| Author: | teckman02 [ Mon Dec 31, 2012 1:11 am ] |
| Post subject: | Re: need a ecm |
too bad you dont have a 3.7 i have one laying around |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|