| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| SFA unit bearing that matches ABS count on 06 CRD http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=73065 |
Page 1 of 1 |
| Author: | mentelorientel [ Mon Dec 31, 2012 4:16 pm ] |
| Post subject: | SFA unit bearing that matches ABS count on 06 CRD |
I am planning on retrofitting an 06 CRD into a CJ8. has any one found a way around the front ABS sensors. Do JK or any other straight axle units tone wheel counts match? Thanks Matt |
|
| Author: | Rich [ Tue Jan 01, 2013 4:02 am ] |
| Post subject: | Re: SFA unit bearing that matches ABS count on 06 CRD |
Pretty hot, I love the scramblers almost as much as a CJ6. I would contact Burnsville Offroad (http://burnsvilleoffroad.com/) and inquire how they fixed that issue with their JK swaps. Would GDE be able to program the PCM/TCM to ignore those signals, or are you worried about ESP trying to take over? |
|
| Author: | Srytrucker [ Tue Jan 01, 2013 9:11 am ] |
| Post subject: | Re: SFA unit bearing that matches ABS count on 06 CRD |
On other posting heard that late model F 250 Sfa have similar pulse tone and should work....it is hear say at this point not confirmed....good luck.....happy new year... |
|
| Author: | mentelorientel [ Wed Jan 02, 2013 7:36 am ] |
| Post subject: | Re: SFA unit bearing that matches ABS count on 06 CRD |
My plan was to transfer everything into the CJ except the air bags and use the Liberty harness complete. Thanks Matt |
|
| Author: | Sir Sam [ Wed Jan 02, 2013 10:41 pm ] |
| Post subject: | Re: SFA unit bearing that matches ABS count on 06 CRD |
See my swap thread for more information, the short of it is you can basically run the engine harness standalone via the couple of connectors by the passenger firewall. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|