LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

bully dog scanner
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=73817
Page 1 of 1

Author:  blackDiesel [ Sun Jan 20, 2013 7:53 pm ]
Post subject:  bully dog scanner

And one use the bully dog scanner instead of reading gauges

Author:  ChooChooman74 [ Sun Jan 20, 2013 10:03 pm ]
Post subject:  Re: bully dog scanner

Everyone who has tried aftermarket OBDII readers have had them freeze. I use torque and anywhere from 5 minutes to 2 hours, it will freeze. Same reports from scangauge users.

Sent from my DROID BIONIC using Tapatalk 2

Author:  blackDiesel [ Sun Jan 20, 2013 10:58 pm ]
Post subject:  Re: bully dog scanner

But on there website they say its maid for liberty crd

Author:  MRausch82 [ Sun Jan 20, 2013 11:03 pm ]
Post subject:  Re: bully dog scanner

:banghead: :banghead: :banghead:

Author:  dirtmover [ Mon Jan 21, 2013 9:09 am ]
Post subject:  Re: bully dog scanner

MRausch82 wrote:
:banghead: :banghead: :banghead:


:-)r According to Linear Logic their Scangauge is also fully compatible with our CRD with the following exception but we all know otherwise.

"Jeep Liberty with the diesel engine does not report fuel use or trip functions and some of the gauges. Unless the recall ECU software update has been completed."

I did point out to them a few years ago that this was not the case and they just tried to blame the freezing on my vehicle.

Author:  DOC4444 [ Tue Jan 22, 2013 8:57 am ]
Post subject:  Re: bully dog scanner

We have an '05. TORQUE PRO has NOT shut down our KJ CRD, or "frozen", even after hours of running. I am running it on an Android X.

HOWEVER, on my 2001 7.3 Excursion, it shuts the motor off when the phone rings and you answer it! (There have been some updates. Maybe they fixed that, not sure.)

DOC

Author:  ChooChooman74 [ Tue Jan 22, 2013 9:32 am ]
Post subject:  Re: bully dog scanner

DOC4444 wrote:
We have an '05. TORQUE PRO has NOT shut down our KJ CRD, or "frozen", even after hours of running. I am running it on an Android X.

HOWEVER, on my 2001 7.3 Excursion, it shuts the motor off when the phone rings and you answer it! (There have been some updates. Maybe they fixed that, not sure.)

DOC

Hey Doc, what BT OBDII reader are you using?

Sent from my Nexus 7 using Tapatalk HD

Author:  dirtmover [ Tue Jan 22, 2013 10:17 am ]
Post subject:  Re: bully dog scanner

ChooChooman74 wrote:
DOC4444 wrote:
We have an '05. TORQUE PRO has NOT shut down our KJ CRD, or "frozen", even after hours of running. I am running it on an Android X.

HOWEVER, on my 2001 7.3 Excursion, it shuts the motor off when the phone rings and you answer it! (There have been some updates. Maybe they fixed that, not sure.)

DOC

Hey Doc, what BT OBDII reader are you using?

Sent from my Nexus 7 using Tapatalk HD


One thing to note is that there are differences in the computer configurations between the '05 and '06 which may be a factor in what DOC is seeing.

My own setup, on an '06, freezes after random amounts of time ranging from a few minutes to 10's of minutes. It has never, however, crashed the TCM on me.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/