LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

For those with bypass filters, let's see some pics!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=73883		 Page 1 of 1
Author:  crd260 [ Thu Jan 24, 2013 3:01 pm ]
Post subject:  For those with bypass filters, let's see some pics!
We need a Silver bullet for Valve-train, Bottom end (and to a limited extent) Turbo failures

For those of us who want to hold on to these CRD's, there is the constant risk of catastrophic failure of certain components...

After hours and hours of research, I think the best thing we could all do to mitigated those risks is install bypass filters..

I know some have already done it, and I know there's more than one way to go about doing it.....

Some have installed them under the hood, others have installed them in the undercarriage..


What is everyone's thoughts on this? Does anyone have pics of their bypass filter installs? let's see em'.

Image

Image

here's some links on the subject I've come across

http://www.jeepforum.com/forum/f67/crd-bypass-oil-filter-installed-part-1-a-580821/
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=58597
Author:  DocB [ Fri Jan 25, 2013 12:41 am ]
Post subject:  Re: For those with bypass filters, let's see some pics!
Been doing UOA and just changed the oil at 17K per recommendation.
As I am a little bit old shool, or that's what they tell me, so I have been slowly creeping upwards on OCIs with the filter.
Will send it in and see what they have to say.
Used 50/50 M1 0W-40 and TDT 5W-40 this last time around.
Previously, used 100% TDT. Came back excellent at 12.5K

BTW-I really like the TDT, but I have a bit of the 0W-40 around so I have to use it.
Author:  skates04 [ Fri Jan 25, 2013 12:48 am ]
Post subject:  Re: For those with bypass filters, let's see some pics!
TDT 5W 40? Turbo Diesel Truck from mobil 1? I am just trying to figure out what oil to put in next, since I figured out T6 has reduced zinc levels now.
Author:  DocB [ Fri Jan 25, 2013 1:38 am ]
Post subject:  Re: For those with bypass filters, let's see some pics!
Yes.
Author:  amslube [ Fri Jan 25, 2013 6:44 pm ]
Post subject:  Re: For those with bypass filters, let's see some pics!
This is a 1st generation Amsoil unit I had laying around when we got the '05 CRD in 2007 and installed it right after we got the vehicle.

Image

Image
Author:  crd260 [ Fri Jan 25, 2013 8:02 pm ]
Post subject:  Re: For those with bypass filters, let's see some pics!
AMSLUBE

let me guess, your turbo, valvetrain and bottom end are all in fantastic shape, right?


If you could do it all over again, would you still install your filters under the hood like you did?

I'm thinking about going off a frame rail with this kit....

http://www.amsoil.com/shop/by-product/f ... pass-unit/
Author:  amslube [ Fri Jan 25, 2013 8:27 pm ]
Post subject:  Re: For those with bypass filters, let's see some pics!
92K on the Liberty CRD and so far no signs of mechanical or turbo problems. I will be doing the TB replacement in the spring or early summer.

I personally like the filter mount under the hood...stays clean and no chance for road hazards to damage the filters. Also it is convenient when changing filter elements. The only issue on many vehicles is finding a place to mount the unit and when you do find room, you will have to construct a bracket of some sort. As you can see in my pictures, I built a mount from 1"x1/8" steel and bolted it to the firewall using existing bolts along with a vertical support to the fenderwell. A plate was welded to the 1" frame to bolt the filter mount to.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/