Hi, I'm getting ready to do a timing belt change and also remove my valve cover/intake manifold for cleaning. I would feel more comfortable using the proper tools for locking the camshafts and cam gears. Is there anybody out there who may have ownership of these and be willing to loan or rent them while I do this job?
I live on Vancouver Island, British Columbia, Canada.

Thanks

_________________
If it was easy it wouldn't be worth doing.
2005 Liberty CRD- GDE Eco-tune, ARP studs, Samcos,

The cam locking pins are the most important. The rest not so much. I don't like the VM flywheel pin, 6mm works great. The VM cam gear holding tool is overrated and takes more time to install than to do the job with a VW or quickly made holding tool.

I don't have tools to rent but can supply procedures for TB and intake removal. PM me if you want a copy?

_________________
05 Liberty CRD Sport with Leather 115k
GDE ECO, No EGR, no FCV, (system gone)
Oil Drain plug P/N 090-039
K&N Air Filter, 2nd gen Fuel filter head
NEW Rockers & lifters
Mobil 1 0w-40
Stant 13519 195 deg inline Thermostat.
0 281 002 845 MAP
Etecno GX3123 7v Glow Plugs
Advance Gold 800CCA Battery
Traded it for a Quality VW TDI

Okay, thanks. I think I should have enough info to do this. I have pdf copies of parts fiche and service manual as well as the info on this site and the five youtube videos.
I think I'll order the two Miller camshaft locking pins but I can't justify the expense of the cam gear locking tool. I can probably jury rig something to work.

Mark

_________________
If it was easy it wouldn't be worth doing.
2005 Liberty CRD- GDE Eco-tune, ARP studs, Samcos,

If decide you want to rent the tools let me know mine are available and I have sent them to Canada before it just takes a little longer, Take a look at my signature, Shipping is a little higher

_________________
2005 Jeep Liberty Sport CRD
Complete Miller CRD Tool Set (Willing to Rent)

Timing Tool Current Wait List https://docs.google.com/document/d/1Jvg_433Tfencao2HWJE3jXYB8Kk_myAtXJhmNNevqnw/edit

Timing Tool Rental FAQ https://docs.google.com/document/d/1UP7CTZ4WZCnj1HlTvpFTX2WfvhauaTwLqghNKhfjI0o/edit

Thanks. I'll keep you in mind. I'm still arranging for parts and GDE stuff.

Mark

_________________
If it was easy it wouldn't be worth doing.
2005 Liberty CRD- GDE Eco-tune, ARP studs, Samcos,