It is currently Sat Nov 01, 2014 2:43 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 25 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Bosch Parts Numbers
PostPosted: Thu May 02, 2013 10:15 am 
Offline
LOST Newbie

Joined: Fri Mar 29, 2013 6:43 pm
Posts: 6
Here is a list of some Bosch part numbers used . All these should be available through any Bosch dealer or distributor (If they have stock) and as some have found they are a lot cheaper than the stealership. Some of these have already been floating around the forum but there are some that may be useful. Post up any others you have or let me know to add them.

*************BOSCH******************************************MOPAR**************
0445010104 New Bosch Injection Pump............... 5166083AA Injection Pump
0986437331 Reman Bosch Inj. Pump................... " .......... "
0928400822 Fuel Control Actuator..................... 5159964AA "Sensor" on CP3
F00N200798 Cascade/Overflow Valve................. 5083711AA Valve on CP3 for fuel return

0445110217 New Bosch Injector ...................... . 5159970AA Fuel Injector
0986435128 Reman Bosch Injector .................... " ......... "

0445214068 Injection Rail .............................. RL000898AA Fuel Rail

0281002534 Fuel Rail Pressure Sensor ................ 68020556AA Rail Pressure Sensor

0281002705 Fuel Pressure Control Valve ............... 5159964AA Fuel Pressure Selenoid

0281002434 Crank Sensor ................................ 5066882AA CrankSensor

0281002667 Cam Position Sensor ........................ 5140332AA Cam Sensor

0281002437 Boost/Temp Sensor ........................ 68031593AA MAP Sensor


Last edited by CMPFIT on Tue May 14, 2013 6:53 pm, edited 2 times in total.

Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Thu May 02, 2013 4:33 pm 
Offline
LOST Member

Joined: Fri Feb 01, 2013 2:06 pm
Posts: 127
Location: Captain Cook, Hawaii
BOSCH # 0 281 002 845 MAP Sensor (Cheaper as a GM Part number - 55206797 ~$20 vs $150+ from Jeep)

_________________
2005 Liberty Sport CRD
Cleaned MAP sensor, ORM, ELM327 Bluetooth OBDII reader with Torque Pro, USA Spec PA-11CHR iPod adapter (used Aux input for Pandora!)
Awaiting install: EVIC, air cleaner hose, and Saikou Michi Catch Can (like a Provent)

Did you hear about the guy who was hooked on brake fluid?
He swears he can stop any time.


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Thu May 02, 2013 7:01 pm 
Offline
LOST Junkie

Joined: Mon Feb 06, 2006 12:24 pm
Posts: 827
What about cascade overflow valve on the CP3?


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Thu May 02, 2013 7:03 pm 
Offline
LOST Newbie

Joined: Fri Mar 29, 2013 6:43 pm
Posts: 6
Drewd wrote:
What about cascade overflow valve on the CP3?



Added, its the same valve as the early Dodge CP3's.


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Mon May 13, 2013 9:47 pm 
Offline
LOST Junkie

Joined: Tue May 29, 2012 8:45 am
Posts: 917
Location: Western, PA
groelzj wrote:
BOSCH # 0 281 002 845 MAP Sensor (Cheaper as a GM Part number - 55206797 ~$20 vs $150+ from Jeep)



Has anyone had any problems with the $20 Bosch GM P/N 55206797 Map sensor? For $20 bucks I'm thinking or replacing it.

_________________
05 Liberty CRD Sport with Leather 115k
GDE ECO, No EGR, no FCV, (system gone)
Oil Drain plug P/N 090-039
K&N Air Filter, 2nd gen Fuel filter head
NEW Rockers & lifters
Mobil 1 0w-40
Stant 13519 195 deg inline Thermostat.
0 281 002 845 MAP
Etecno GX3123 7v Glow Plugs
Advance Gold 800CCA Battery
Traded it for a Quality VW TDI


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Tue May 14, 2013 8:23 am 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jun 18, 2012 5:50 pm
Posts: 938
Location: Nashville, TN
kjjet wrote:
groelzj wrote:
BOSCH # 0 281 002 845 MAP Sensor (Cheaper as a GM Part number - 55206797 ~$20 vs $150+ from Jeep)



Has anyone had any problems with the $20 Bosch GM P/N 55206797 Map sensor? For $20 bucks I'm thinking or replacing it.


Why would they have problems? It is the exact same part. Mine has been in since I did my rockers/lifters with nary a problem.

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Tue May 14, 2013 8:31 am 
Offline
LOST Junkie

Joined: Tue May 29, 2012 8:45 am
Posts: 917
Location: Western, PA
O.... OK. I did not check the P/Ns. I thought it was different.

Thanks!

_________________
05 Liberty CRD Sport with Leather 115k
GDE ECO, No EGR, no FCV, (system gone)
Oil Drain plug P/N 090-039
K&N Air Filter, 2nd gen Fuel filter head
NEW Rockers & lifters
Mobil 1 0w-40
Stant 13519 195 deg inline Thermostat.
0 281 002 845 MAP
Etecno GX3123 7v Glow Plugs
Advance Gold 800CCA Battery
Traded it for a Quality VW TDI


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Tue May 14, 2013 9:28 am 
Offline
LOST Newbie

Joined: Tue Oct 11, 2011 9:16 am
Posts: 2
Location: Russia, Taganrog
kjjet wrote:
groelzj wrote:
BOSCH # 0 281 002 845 MAP Sensor (Cheaper as a GM Part number - 55206797 ~$20 vs $150+ from Jeep)



Has anyone had any problems with the $20 Bosch GM P/N 55206797 Map sensor? For $20 bucks I'm thinking or replacing it.


The correct number of MAP sensor is BOSH 0281002 437 for CRD 2005.
Bosch 0281002 845, it's General Motors 55206797 does not fit the engine a lot of smoke, incomplete combustion of fuel.
Sorry for the my English, I teaching a long time ago.

_________________
Jeep Cherokee KJ 2005 CRD


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Tue May 14, 2013 2:27 pm 
Offline
LOST Junkie

Joined: Tue May 29, 2012 8:45 am
Posts: 917
Location: Western, PA
I just pulled mine out. Its Bosch P/N 0 281 002 437.

1. Who has used Bosch P/N 0 281 002 845 which is GM P/N 55206797?
2. If you have? How dose it work?

Thanks

_________________
05 Liberty CRD Sport with Leather 115k
GDE ECO, No EGR, no FCV, (system gone)
Oil Drain plug P/N 090-039
K&N Air Filter, 2nd gen Fuel filter head
NEW Rockers & lifters
Mobil 1 0w-40
Stant 13519 195 deg inline Thermostat.
0 281 002 845 MAP
Etecno GX3123 7v Glow Plugs
Advance Gold 800CCA Battery
Traded it for a Quality VW TDI


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Tue May 14, 2013 4:15 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun Mar 28, 2010 9:15 am
Posts: 3874
Location: Tallahassee, Florida
CMPFIT - while it's good (I thank you for it) to have Bosch numbers your list suffers from the typical terminology problems associated with many DCJ parts and a lack of corresponding Mopar numbers. As a result I for one am not sure in all cases which Bosch # XXXX matches Mopar # YYYYY although in some cases it's obvious. I've attempted a cross walk which I will send you via email to see if I have it right and to avoid excess chat. Perhaps you will consider editing you original post to provide the cross walk to the Mopar #.

For what it's worth some examples of the issues:
1. what you and the parts fiche list as the Boost/Temp Sensor is more commonly known as the MAP (Manifold Absolute Pressure) sensor
2. there are 2 possible Bosch replacements listed for that sensor a) the one you mention 0281002437 and b) the one some others mention 0281002845. I have no affirmative knowledge of which is correct but I can say a) they look the same; b) I cannot find specs to compare; and c) the prices are quite different ca. $65 vs. ca. $25, respectively. I strongly suspect the 2 Bosch parts are not the same. In addition information on the RockAuto, Airtex, and Standard Motor Products cross walk sites strongly implies that the Bosch 0281002437 is the proper equivalent.

UPDATE - see my June 30, 2013 post at viewtopic.php?f=5&t=74785&p=795623#p795623 . Per MrMopar64 the "845" or GM equivalent sensor is a perfectly acceptable substitute for the original "437" sensor.

_________________
05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs, Miller tools to loan in my immediate vicinity


Last edited by papaindigo on Sun Jun 30, 2013 10:11 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Tue May 14, 2013 6:45 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jun 18, 2012 5:50 pm
Posts: 938
Location: Nashville, TN
Alright, the one currently in my Jeep is 0281 002 437.

This is the one I ordered from GM for $17.48.

I don't have the original part #, but it's in there and working.

When I go online and look, I find the GM part # 44206797 and it shows that it is 0281 002 845.

Weird.

No, it's still there.

http://www.aliexpress.com/item/MAP-Sensor-0281002437-0-281-002-437/535244178.html

It's gone up about $3, but still, for $22 it's kinda crazy to pay more...

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Tue May 14, 2013 7:08 pm 
Offline
LOST Newbie

Joined: Fri Mar 29, 2013 6:43 pm
Posts: 6
papaindigo wrote:
CMPFIT - while it's good (I thank you for it) ....................................... the proper equivalent.



Thank you very much for all that, I figured this thread would be a work in progress, I added most of the numbers you provided. I will keep updating it as everyone wishes.

As far as the MAP sensor, Bosch does have two very different prices for it. I found an Italian site that says both of these cross to the same fiat number too. Should we say they are both acceptable numbers?


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Wed May 15, 2013 9:53 am 
Offline
LOST Junkie

Joined: Tue May 29, 2012 8:45 am
Posts: 917
Location: Western, PA
So...has anyone used Bosch 0281 002 845 in a CRD?

I ordered a GM 55206797. Should be at the dealer today. I will see what Bosch # it has on it.

_________________
05 Liberty CRD Sport with Leather 115k
GDE ECO, No EGR, no FCV, (system gone)
Oil Drain plug P/N 090-039
K&N Air Filter, 2nd gen Fuel filter head
NEW Rockers & lifters
Mobil 1 0w-40
Stant 13519 195 deg inline Thermostat.
0 281 002 845 MAP
Etecno GX3123 7v Glow Plugs
Advance Gold 800CCA Battery
Traded it for a Quality VW TDI


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Wed May 15, 2013 10:56 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sun Mar 28, 2010 9:15 am
Posts: 3874
Location: Tallahassee, Florida
I can positively confirm that the original from the factory MAP senor on my 05 and my son's 06 are both the Bosch 0 281 002 437. Given that and the price difference between the 2 Bosch products I'd say the 2 Bosch products are not the same and that the 0 281 002 437 is the correct replacement.

I have no clue how 0 281 002 437 differs from 0 281 002 845 or its equivalent GM 55206797.

For the price difference of ca. $50 I don't plan on experimenting with my engine, in the unlikely event my MAP sensor needs replacing, absent Bosch confirming that the 2 Bosch PNs are an identical product.

UPDATE - see my June 30, 2013 post at viewtopic.php?f=5&t=74785&p=795623#p795623 . Per MrMopar64 the "845" or GM equivalent sensor is a perfectly acceptable substitute for the original "437" sensor.

_________________
05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs, Miller tools to loan in my immediate vicinity


Last edited by papaindigo on Sun Jun 30, 2013 10:11 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Wed May 15, 2013 1:35 pm 
Offline
LOST Junkie

Joined: Tue May 29, 2012 8:45 am
Posts: 917
Location: Western, PA
Well.....The GM 55206797 came to the dealer as Bosch 0 281 002 845. I did not get it. Don't want to chance that. From what i can see on Bosch web, they are not interchangeable. If someone else has used it? Please advise.

_________________
05 Liberty CRD Sport with Leather 115k
GDE ECO, No EGR, no FCV, (system gone)
Oil Drain plug P/N 090-039
K&N Air Filter, 2nd gen Fuel filter head
NEW Rockers & lifters
Mobil 1 0w-40
Stant 13519 195 deg inline Thermostat.
0 281 002 845 MAP
Etecno GX3123 7v Glow Plugs
Advance Gold 800CCA Battery
Traded it for a Quality VW TDI


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Fri May 17, 2013 10:10 am 
Offline
LOST Junkie

Joined: Tue May 29, 2012 8:45 am
Posts: 917
Location: Western, PA
I did find people using 0 281 002 845 with no issue. I contacted Bosch due to there is no specifications listed for 0 281 002 845. Bosh rep told me he did not know the difference other than it may have a pressure difference. He also could not get any specifications. Several others have told me to try it. So....It's now installed. Taking it for a quick drive, I noticed no driving difference. Only noticed that my idle is more stable. Which was the reason i wanted to replace it. I will be driving a few extra miles over the weekend, so i will update later.

_________________
05 Liberty CRD Sport with Leather 115k
GDE ECO, No EGR, no FCV, (system gone)
Oil Drain plug P/N 090-039
K&N Air Filter, 2nd gen Fuel filter head
NEW Rockers & lifters
Mobil 1 0w-40
Stant 13519 195 deg inline Thermostat.
0 281 002 845 MAP
Etecno GX3123 7v Glow Plugs
Advance Gold 800CCA Battery
Traded it for a Quality VW TDI


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Mon May 20, 2013 9:19 am 
Offline
LOST Junkie

Joined: Tue May 29, 2012 8:45 am
Posts: 917
Location: Western, PA
UPDATE Using 0 281 002 845, GM 55206797. I did drive the Jeep over 150 miles and this is what i noticed.

1. Stable Idle.
2. Smoother acceleration.
3. Better shifting. (No bouncing in and out of overdrive)
4. Better hill climbing.
5. Smoother highway speed.


I did not check MPG, but it must be better due to less throttle be applied climbing hills and on the highway.

The best $20 tune up I ever had!!

_________________
05 Liberty CRD Sport with Leather 115k
GDE ECO, No EGR, no FCV, (system gone)
Oil Drain plug P/N 090-039
K&N Air Filter, 2nd gen Fuel filter head
NEW Rockers & lifters
Mobil 1 0w-40
Stant 13519 195 deg inline Thermostat.
0 281 002 845 MAP
Etecno GX3123 7v Glow Plugs
Advance Gold 800CCA Battery
Traded it for a Quality VW TDI


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Fri Jun 21, 2013 12:15 pm 
Offline
LOST Member

Joined: Thu Sep 14, 2006 10:19 pm
Posts: 346
Location: NJ/PA
Just ordered a new fuel rail pressure sensor # 68020556AA and the Bosch part inside is part #0281002706.
Just an FYI, but, is this the correct part?

Also, since I have never installed on of these, I could use some help and advice.

What is the correct thread sealer to use on this part?

TIA.

_________________
06 CRD LIMITED- Factory Belly Armor, Hooks.
EHM, MagnaFlow SS Cat Back, FS-2500, Some Gauges, PML Trans. Pan, RL Diff Cover, Marinco Mod, FIA Blanket, Cooper Discoverer ATR 225/75, CTS 245/70, Front-JBA 2" C/Os, Rear-OME HD, JBA UCA, SS Brake Lines.


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Fri Jun 21, 2013 12:45 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jun 18, 2012 5:50 pm
Posts: 938
Location: Nashville, TN
You can download the service manual, which roundabout gives you the step by step instructions, from the noob guide.

It will also tell you if you need any thread sealant. I did not use any on mine when I reassembled it because it had none when I disassembled it.

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings


Top
 Profile  
 
 Post subject: Re: Bosch Parts Numbers
PostPosted: Fri Jun 21, 2013 12:48 pm 
Offline
LOST Member

Joined: Sat Dec 08, 2012 6:40 pm
Posts: 233
Location: Surrey,BC
Without going into hocus-pocus of part numbers just check the image of what's inside the box it is the same thingy mfg. by Bosch with same digits on it so works the same I replaced mine some 10'000 Kms ago with no issues.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com