| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Skid plates with large tranny pan http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=75185 |
Page 1 of 1 |
| Author: | Oilburner44 [ Thu May 09, 2013 11:00 am ] |
| Post subject: | Skid plates with large tranny pan |
Does anyone know if any of the aftermarket skid plate companies make a skid that allows clearance for a larger tranny pan? I smashed up my tranny pan this past weekend wheeling, and figure while im looking for a tranny pan skid plate, i might as well replace the pan and put a deep pan on it. Any comments too as to which skid plates are best would be great! I beat the rig hard in the woods, so factory mopar skids arnt my best option |
|
| Author: | tjkj2002 [ Thu May 09, 2013 11:20 am ] |
| Post subject: | Re: Skid plates with large tranny pan |
They all mount the same so all the trans skids would have to be spaced down the clear deep pans,kinda defeats the whole purpose since you will have a skid hanging down so far it will catch on things. |
|
| Author: | Oilburner44 [ Thu May 09, 2013 11:28 am ] |
| Post subject: | Re: Skid plates with large tranny pan |
dam, maybe i will just run a few extra tranny coolers haha thanks tjkj |
|
| Author: | papaindigo [ Thu May 09, 2013 12:05 pm ] |
| Post subject: | Re: Skid plates with large tranny pan |
There has been some chat recently about Asfir aluminum skid plates being decent and on sale right now. I cannot comment on how good they are as I'm running OEM ones but folks seemed to like them and I just checked and they are still on sale. See http://www.asfir4x4.com/ |
|
| Author: | Oilburner44 [ Thu May 09, 2013 3:59 pm ] |
| Post subject: | Re: Skid plates with large tranny pan |
has anyone bent these skids? really decent prices! |
|
| Author: | papaindigo [ Thu May 09, 2013 4:14 pm ] |
| Post subject: | Re: Skid plates with large tranny pan |
see viewtopic.php?f=5&t=74508&p=785598&hilit=ASFIR#p785598 dgeist at least likes them |
|
| Author: | Lancer [ Fri May 10, 2013 5:05 am ] |
| Post subject: | Re: Skid plates with large tranny pan |
I have an Asfir tank skid - the rest of my skids are by Skid Row(they didn't have the tank skids in stock back when I was ordering). It seems good and the aluminium is pretty thick. |
|
| Author: | audiboy86 [ Fri May 10, 2013 4:45 pm ] |
| Post subject: | Re: Skid plates with large tranny pan |
I own them and as you see I am not a light weight and and degist can tell you I am not easy on my rig. Last year I went to ECS with a dysfunctional transfer and had no 4x4 so I had to keep steam up to keep up. I bounced them on rocks tree roots everything not a single issue. |
|
| Author: | mk38tech [ Fri Feb 14, 2014 9:32 am ] |
| Post subject: | Re: Skid plates with large tranny pan |
anyone had a problem with the deep tranny pan and the spin on filter? i wrote a few things about it here. just an fyi viewtopic.php?f=5&t=74713&p=821942#p821942 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|