Ok, thanks.
I was hoping someone took pictures of the process.
I'm trying to visualize the placement/positions of the rockers and cams.
Just a kinda mental preparation for when IT happens.
(I dare not speak IT's name
)
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| step by step rocker arm replacement? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=75263 |
Page 1 of 1 |
| Author: | flash7210 [ Wed May 15, 2013 8:10 am ] |
| Post subject: | step by step rocker arm replacement? |
Is there a thread here that shows step by step rocker arm replacement? |
|
| Author: | Hexus [ Wed May 15, 2013 10:16 am ] |
| Post subject: | Re: step by step rocker arm replacement? |
No, that its a long and arduous process if you start from scratch. Sir Sam's timing belt YouTube video gets you very close. After doing all that, you basically remove all four fuel injectors and the fuel rail, move the ECM/TCM cabling out of the way, remove the 17 (iirc) bolts holding the intake on, then remove the intake and you can remove and replace the rockers and lifters by hand. Download the service manual for the retorque process, you have to do it in a certain order. There are a bunch of us here that can and will help with advice and comments if you need it. Sent from my DROID RAZR using Tapatalk 2 |
|
| Author: | flash7210 [ Wed May 15, 2013 10:22 am ] |
| Post subject: | Re: step by step rocker arm replacement? |
Ok, thanks. I was hoping someone took pictures of the process. I'm trying to visualize the placement/positions of the rockers and cams. Just a kinda mental preparation for when IT happens. (I dare not speak IT's name )
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|