I had a lubrication problem on my recently purchased CRD. I need the following parts. Overhaul gasket set, Rod bearings, Set of rings, Exhaust Cam, Intake Cam Rocker arms & lifters, timing belt, and head bolt set.
Where can I buy these parts?

There are a couple of English Importers that will ship to the USA.
You could also check with ID parts

As regards head bolts, suggest that you consider ARP studs

_________________
Grid power- the one true essential

2005 Liberty CRD- ARP studs, Fumoto, Hayden FC, inline Tstat, ETechno 7v GP, Platinum P1, in-tank lift pump.
1983 Volvo D24T
1981 Volvo D24
Dodge Cummins TD
Case 580B
Mitsubishi MT180 diesel
Kubota BX25 diesel

Where are you exactly?

_________________
My CRD Build Thread
Soon to Come:more lights

Chicago IL

ARP head Studs Cheap you will need two of these kits. And you can get just a head gasket from green diesel just figure out which one you need. Then you will need the following Exhaust Manifold Gasket, Valve Cover Gasket, Set of Intake Gaskets, Exhaust manifold to turbocharger gasket you can find the part numbers on http://www.IDparts.com but can ususally get them chaper if you shop around. The best places to get rocker sets is from Idparts though and the cams and while your at it you may want to have a hard look at your turbo also. But if you are having a dealer do the work just log on to IDParts and order the Cyclinder head install kit and a set of rockers because they will not install the ARP head stud kit since it isnt factory.

_________________
My CRD Build Thread
Soon to Come:more lights

Thanks for the heads up