| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Shuttering feeling http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=75505 |
Page 1 of 1 |
| Author: | LS12FAST4U [ Thu Jun 06, 2013 8:15 pm ] |
| Post subject: | Shuttering feeling |
So when I let off the gas I have a weird shutter and vibration. Its almost like really bad warped rotors but its also causing a lot of vibration. When I step on the gas it goes away. I don't know what it is but its really frustrating. |
|
| Author: | papaindigo [ Thu Jun 06, 2013 8:42 pm ] |
| Post subject: | Re: Shuttering feeling |
Sounds more like drive line vibration - CV joints; drive shaft "U" joints; drive shaft slip joint sort of thing although I would not rule out motor/tranny mounts. |
|
| Author: | LS12FAST4U [ Thu Jun 06, 2013 9:37 pm ] |
| Post subject: | Re: Shuttering feeling |
Anyway to check u joints? It also does it when I turn into a parking space. It has to be real slow but I really feel it then. |
|
| Author: | papaindigo [ Fri Jun 07, 2013 6:26 am ] |
| Post subject: | Re: Shuttering feeling |
Vibration or clicking when turning is often CV joints. Does it do it more when turning left or right? Drive shaft "U" joint check requires dropping drive shaft. Chat indicates you cannot do a good job of checking them on the vehicle. Don't know that I've seen a how to but should be easy or see FSM. |
|
| Author: | LS12FAST4U [ Sat Jun 08, 2013 9:40 pm ] |
| Post subject: | Re: Shuttering feeling |
Feeling is the same either direction. Does it worse when just letting off the gas. |
|
| Author: | crdjoe [ Fri Jun 21, 2013 1:32 pm ] |
| Post subject: | Re: Shuttering feeling |
Sound like mine had the same problem a few years ago the stealer said it was the output bearing on the transfer case and u joints. Chrysler put the doo doo joints in I just put the super strenght moogs in they are greaseable and made better about 13.+ at rock auto! |
|
| Author: | LS12FAST4U [ Fri Jun 21, 2013 11:06 pm ] |
| Post subject: | Re: Shuttering feeling |
Yeah I replaced the u joints with precision super strengths from O'Reilly and its all good. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|