I want to do a diesel purge of Prudence (2005 Liberty) like was done here: http://forums.tdiclub.com/showthread.php?t=240656

What I would like to know is if there is an in-tank lift pump relay or fuse that needs to be pulled first.

Simply question that I cannot seem to find an answer to.

I also have a squeaky viscous heater but I found answers to that one! It was a rough winter on the Liberty: new glow plugs (glow worms as my wife calls them) in early December, followed shortly by a wheel bearing going out. Now the bushings in the front suspension are groaning (Al's A-Arms?!?) and I hate my job, but that isn't Prudences fault.

Anyway, just venting a bit. If someone can answer my first question about diesel purging I will be a satisfied man.

Thanks!

Unless you installed one there is no in tank lift pump. Mine had a great winter it is summer all year long in south florida. I think I am never going to have to change the glow plugs. I Quit my hated job and it took two months but I now have a better job making less money and have two days off in a row. No nights. It is going great.

_________________
2006 Liberty CRD -- Spare tire replaced with Veg tank, semi filter for veg, FPHE, Electric common rail line heater, fill vegetable oil tank every 3 days. ORM, EHM comes out in front of the passenger rear tire. Wife has new job and 20 mile round trip to work. I borrow her Jeep a lot and live in South Florida.

Ah but you will never know the thrill of working on a car at 10 below zero. Or taking a snowshoe hike in the woods to ice caves at 17 below.

I only plugged in Prudence a couple of times after the glow plug change, she didn't enjoy starting in the cold but did everytime.

So the in-tank pump is only on gassers??? I was sure I read a write up here about changing out the pump for a CRD.

There is no in tank pump as stock, only if a previous owner installed one.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.

For Greasey Bob... see what you're missing?

Thank you! On to purge!

Winter definitely has its beauty but it's way too long over here... I'd be rather sipping some cocktails on the beach in South Florida, lol.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.