So I'm trying to reflash the eco tune back on and it erases the current written tune and then I get the awesome can't communicate with ecu please try again. Now usually when that happens after about ten to twenty times of trying it finally works. Well I've tried probably close to a hundred times now and still nothing. Crappy part is I can't do anything with the rig because it doesjt have any tune written to the ecu anymore. Any suggestions?

_________________
OME 2790/2948 Rancho all around
JBA strut plates with clevis lift
2 extra rear upper isolators and one extra lower
Front sits 23
Rear sits 22 3/4
265 75 16 Maxxis Big Horn MT
GDE Hot Tune
Bumper trimming up front

I'd contact GDE and see what Keith has to say.

_________________
Light Khaki 2.8CRD: TJM alloy bumper; Skid Row &Asfir skids;ext. breathers; SAMCO hoses; Grabber At3 235/70/16; Fumoto; Euro TC; Odyssey PC1500;GDE FTEcotune; OME lift; lightforce driving lights;ARB diff cover;nylon fan+Hayden2905;ss vortex exhaust; Airflow snorkel; Frontrunner roofrack; rock rails

I have. No response back from him. Its the weekend so I'm sure he's busy.

_________________
OME 2790/2948 Rancho all around
JBA strut plates with clevis lift
2 extra rear upper isolators and one extra lower
Front sits 23
Rear sits 22 3/4
265 75 16 Maxxis Big Horn MT
GDE Hot Tune
Bumper trimming up front

Why do you frequently change tunes?

DOC

_________________
2005 KJ CRD Ltd Detroit TrueTrac Bilsteins G2 GDE "HOT" ECU GDE TCM "Tow Tune" "euro" TC SEGR Weeks Elbow New HG at 130K ARPs Clean CAT aFe Filter Magnaflow Exhaust EHM Cumminos In-Tank Lift Pump Hayden Fan Clutch Nylon Fan VH Enabled with GDE lower shutoff point Recalibrated Temp Gauge Tekonsha Prodigy Sears P-1 ZDDP

I've had the tunes for a year and I've probably changed between the two three times

_________________
OME 2790/2948 Rancho all around
JBA strut plates with clevis lift
2 extra rear upper isolators and one extra lower
Front sits 23
Rear sits 22 3/4
265 75 16 Maxxis Big Horn MT
GDE Hot Tune
Bumper trimming up front

I have had communication issues using my regular obdII scan tool before. What I did was open the hood, unplug the computer and wait a minute or two... Plug it back on and the problem went away. Not sure if I had a goofy connection or what... But it worked for me. Worth a shot.

_________________
Mike Rausch
Bear, Delaware
2006 Liberty Sport CRD 253K

Yeah Keith got a hold of me and got me some new firmware. Apparently 05's were weird on the ecu.

_________________
OME 2790/2948 Rancho all around
JBA strut plates with clevis lift
2 extra rear upper isolators and one extra lower
Front sits 23
Rear sits 22 3/4
265 75 16 Maxxis Big Horn MT
GDE Hot Tune
Bumper trimming up front