| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| DOC4444 I need your fan clutch method http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=76351 |
Page 1 of 1 |
| Author: | Verbal_CRD [ Fri Aug 16, 2013 6:14 pm ] |
| Post subject: | DOC4444 I need your fan clutch method |
I searched and searched... Im assuming you put the not and bolt through the lift hook but ill be d@mned if my 5/8's lines up, lol |
|
| Author: | DOC4444 [ Fri Aug 16, 2013 9:23 pm ] |
| Post subject: | Re: DOC4444 I need your fan clutch method |
I was not smart enough to realize that all you have to do is put the right size socket though one of the holes in the fan pulley and engage it on one of the bolt heads behind. (See one of the picture guides for TB service.) DOC |
|
| Author: | Verbal_CRD [ Fri Aug 16, 2013 9:26 pm ] |
| Post subject: | Re: DOC4444 I need your fan clutch method |
I actually ended up using the allen key trick, Thank for the response! |
|
| Author: | striperman36 [ Fri Aug 16, 2013 10:28 pm ] |
| Post subject: | Re: DOC4444 I need your fan clutch method |
the old hidden bolt trick! |
|
| Author: | Auberon [ Sat Aug 17, 2013 11:04 am ] |
| Post subject: | Re: DOC4444 I need your fan clutch method |
From memory 13mm AF is the size you need others would be able to correct that if I have it wrong. |
|
| Author: | Verbal_CRD [ Sat Aug 17, 2013 3:57 pm ] |
| Post subject: | Re: DOC4444 I need your fan clutch method |
A 13mm works or a 6mm hex key in the small hole works too. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|