Hey guys,


I need to do some custom wiring and I need an ignition plus from the fuse panel. That wire will go on a relay so it won't matter which fuse I'll be taking it from. My question is: can you recommend a location (like which fuse) I can get it from (preferably the fuse panel under the hood)? I could look them up myself also, just trying to save some time looking up the fsm diagrams or checking them with a voltmeter. I'm trying to use that plus wire for some gauges and the relay plus for the custom e-fan I have.

Thanks a lot!

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.

Due to overwhelming answers, I had to start looking in the manual. After spending about an hour picking my brain where to get the ignition plus considering the schematics, I decided to use the radio plus to start a relay and then do my thing from the relay output. Too bad I didn't think at this before...

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.