injector torque setting

lacabrera · **Posted:** Tue Sep 02, 2014 5:25 pm

Can any one tell me the torque setting for the injector bolt. Been searching for it with no joy. I don't wont to over tighten it and strip the thread.

Mike92104 · **Posted:** Tue Sep 02, 2014 11:32 pm

From the FSM: "...Torque bolt to 32.4 N·m (24 ft. lbs.).."

lacabrera · **Posted:** Wed Sep 03, 2014 3:57 am

Mike92104 wrote:

From the FSM: "...Torque bolt to 32.4 N·m (24 ft. lbs.).."

Many thanks for the info Mike

lacabrera · **Posted:** Sat Sep 06, 2014 11:53 am

Mike92104 wrote:

From the FSM: "...Torque bolt to 32.4 N·m (24 ft. lbs.).."

Just checked these figures in the work shop manual. 32.4 N-m or 18lbs. Mike is right but I feel its to much for the alloy head. I would go no more than 18lbs as stated in the manual. Just shows that the manual can be wrong with 32.4 N-m

injector torque setting

Who is online