| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| New ECM http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=77881 |
Page 1 of 1 |
| Author: | kg4ygb [ Mon Dec 30, 2013 11:30 pm ] |
| Post subject: | New ECM |
ECU is out on my 2005 CRD. Found one on ebay that is meant for a 2006 CRD, but the part number matches up to mine (P56044562CC). Do y'all think a 2006 ECM would work fine (once flashed) in a 2005? |
|
| Author: | Billwill [ Tue Dec 31, 2013 5:02 am ] |
| Post subject: | Re: New ECM |
kg4ygb wrote: ECU is out on my 2005 CRD. Found one on ebay that is meant for a 2006 CRD, but the part number matches up to mine (P56044562CC). Do y'all think a 2006 ECM would work fine (once flashed) in a 2005? If the part number is the same it should work...once the ECM is flashed with the VIN, SKIS code, injector values etc.  Get some more opinions though before buying it and blaming me if it does not work! 
|
|
| Author: | GreenDieselEngineering [ Tue Dec 31, 2013 10:30 am ] |
| Post subject: | Re: New ECM |
The junk yard miss labeled the ecm. 56044562CC is a 2005 ECM. You just need to change the VIN to have it working in yours. |
|
| Author: | kg4ygb [ Tue Dec 31, 2013 12:06 pm ] |
| Post subject: | Re: New ECM |
Thanks BW and GDE. GDE, Will the ECU work without changing the VIN and mileage? I'm not trying to to be a criminal, just watching my dollars. Thanks! |
|
| Author: | GreenDieselEngineering [ Tue Dec 31, 2013 1:28 pm ] |
| Post subject: | Re: New ECM |
The mileage is irrelevant. The VIN must match your CRD or it will only run for about 3 seconds and then shut off for security reasons. If you mail in the ecm to us for a tune, we can change the VIN to match your vehicle. |
|
| Author: | kg4ygb [ Tue Dec 31, 2013 4:09 pm ] |
| Post subject: | Re: New ECM |
Thanks GDE. I've always wanted your tune... I'll send you an email if i can scrape up the cash. Thanks! |
|
| Author: | CRD05il [ Sun Jan 12, 2014 3:12 pm ] |
| Post subject: | Re: New ECM |
I have a extra ECM if you need one PM and we can work something out. |
|
| Author: | JDaPP [ Tue Nov 04, 2014 8:05 am ] |
| Post subject: | Re: New ECM |
Do you still have the ECM? |
|
| Author: | gmctd [ Fri Nov 07, 2014 4:35 pm ] |
| Post subject: | Re: New ECM |
You'll need to program-in serial numbers of the glow plugs installed in your vehicle - the four S\N's are printed on the bar-code label pasted onto the timing-case cover |
|
| Author: | papaindigo [ Fri Nov 07, 2014 5:10 pm ] |
| Post subject: | Re: New ECM |
Programming serial #s is for the injectors not the glow plugs, which have no serial #s. The vehicle will, IIRC, run without that programming but it's a bit more efficient with that programming. |
|
| Author: | gmctd [ Fri Nov 07, 2014 6:31 pm ] |
| Post subject: | Re: New ECM |
Correct on the injectors - just seeing if anyone was paying attention............................ And it is about efficiency - factory flow-matches the injectors and serializes the bodies to ensure exact replacement when\if necessary - ECM can self-adjust within limits but it is best to have matched sets within design spec |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|