All you need to know for breaking in your engine is:
http://mototuneusa.com/break_in_secrets.htm <---do only on a warmed up engine! Afterwords drive it normally except for first 1000 miles or do DO NOT USE cruise control and do not maintain a constant engine speed/and or load... Been following this type of break in before it was published on internet or 30 years and 32 vehicles and NEVER had issue with oil consumption or excessive blowby. Do a heavy acceleration (full throttle shifts up to highway speeds at least once a week-called an "Italian Tuneup" so your VNT turbo vanes do not stick from exhaust crud that can build on them if you drive like a granny.
If your vehicle has 0w40 in it, dump it after a couple hundred miles and put in some good old Shell or Delo 5w40 oil...your valve train will thank you. Don't forget to do turbo cool downs religiously!
If you haven't done so, get a GDE eco tune immediately to reduce EGR function.