Hey Guys!

Thanks to this forum I just finished replacing my HG!! Woot Woot!!

Some things have come up since I have done that.

I had the ABS/Break light issue.. I've replaced the front hubs and the sensors up there and cleaned the sensor on the top of the diff (which wasn't dirty at all to my eye). I have since had an issue where either my speedo doesn't work or when it does the abs/brake light are on all the time.. either way my mileage isn't increasing.

Two days running and now I have another GP1 Circuit issue, and now a controller issue that just popped up. I replaced the GP (all 4) with the Econotec drop ins from IDparts.com. All of them tested at 0.3 ohms when I put them in.

I also think my vanes are sticking on my turbo.. how can I get them unstuck without tearing the turbo off again?

Thanks in advance gents!

_________________
Trevor

'05 Limited CRD Inferno Red Pearl Coat
Home made provent installed @ 35443, SEGR installed @ 35466, Fumoto valve @ 37500, trans and transfer case skid, In tank pump installed @ 43500, Suncoast TC & Transgo Shift Kit @ 44730, EGT, Boost, Trans temp gauges, Samco hoses, Rebuilt Trans w/ HD454RFE kit @ 56K, Inmotion Stage 2 @ 56K