| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Dumb question-Cylinder number? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=79214 |
Page 1 of 1 |
| Author: | mtbdemon [ Wed May 28, 2014 5:56 pm ] |
| Post subject: | Dumb question-Cylinder number? |
I can't seem to find the answer anywhere but what are the corresponding cylinder numbers on the CRD? Specifically, the cylinder number against the fire wall? Also, What is the process on replacing an injector as I know they are codded for their specific cylinder. Thanks! Ken |
|
| Author: | 05infernoCRDL [ Thu May 29, 2014 1:43 am ] |
| Post subject: | Re: Dumb question-Cylinder number? |
1 in the front of the engine 4 next to the firewall.. Injectors are easy.. Unplug.. One bolt holding it in and the hard line nut.. The bolt is a 10 mm the hard line is a 17mm (i think... Maybe a 14mm) Sent from my SCH-I535 using Tapatalk |
|
| Author: | thermorex [ Thu May 29, 2014 7:45 am ] |
| Post subject: | Re: Dumb question-Cylinder number? |
There is also a label with the injector number, on the injector wire, if it's not torn up. |
|
| Author: | mtbdemon [ Thu May 29, 2014 12:52 pm ] |
| Post subject: | Re: Dumb question-Cylinder number? |
Is there a schematic that shows the firing order? I go Googled it, without much luck...Thanks! |
|
| Author: | papaindigo [ Thu May 29, 2014 2:25 pm ] |
| Post subject: | Re: Dumb question-Cylinder number? |
FSM (download from Sir Sam's Noob guide link) says injection order is 1-3-4-2 which I presume is firing order. |
|
| Author: | thermorex [ Thu May 29, 2014 3:00 pm ] |
| Post subject: | Re: Dumb question-Cylinder number? |
Correct, and most 4 cyl engines I've seen have the same order, 1-3-4-2, I'd guess is because of better balancing of the engine. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|