| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| EGT, Boost,Trans temp gauges http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=79215 |
Page 1 of 1 |
| Author: | mtbdemon [ Wed May 28, 2014 6:13 pm ] |
| Post subject: | EGT, Boost,Trans temp gauges |
I have a 5.9 Dodge cummins that I totally love. The previous owner had installed the above gauges in a cluster on the left hand side of the window. On a recent trip to Arizona from Oregon and while carrying a 11.5 ft camper and cargo trailer, the information was wonderful to have on the longer hills, so it made me wonder if there is anything like that available for my Jeep CRD? I use the jeep to pull my 2500-3000 pound loaded cargo trailer so having this info would be nice. Has anyone installed this type of cluster or close to it and if so, what was the brand and if you have any pictures to share, that would be great. Thanks Ken |
|
| Author: | diesel_guy86 [ Wed May 28, 2014 8:49 pm ] |
| Post subject: | Re: EGT, Boost,Trans temp gauges |
There's a 2 gauge pod available but not 3. You can however get 2 in 1 gauges, 2 of these in a 2 gauge pod would give you 4 engine vitals you can monitor. McNally gauges offer 2 in 1's, glowshift gauges make a 3 in 1 but its slightly larger. Here's a pic from a member on here, notpicky,  I really like it but I'm running a gauge pod like what you mentioned. |
|
| Author: | WWDiesel [ Wed May 28, 2014 9:04 pm ] |
| Post subject: | Re: EGT, Boost,Trans temp gauges |
I too am running a 3 gauge "A" pillar setup with boost, EG temp before turbo, and trans temp on my Dodge Cummins. Would love to have the same setup on my Jeep CRD. I am supprised no one makes a 3 gauge "A" pillar gauge pod for our KJ's.... 
|
|
| Author: | diesel_guy86 [ Wed May 28, 2014 10:54 pm ] |
| Post subject: | Re: EGT, Boost,Trans temp gauges |
Actually the guys that make our 2 gauge pod, gaugepods.com, were going to make a 3 gauge. All they needed were 10 pre-orders before they would make up the mold. LOST members failed miserably with only 3 pre orders placed, so they canceled it and refunded the money. |
|
| Author: | mtbdemon [ Thu May 29, 2014 2:13 pm ] |
| Post subject: | Re: EGT, Boost,Trans temp gauges |
diesel_guy86 wrote: Actually the guys that make our 2 gauge pod, gaugepods.com, were going to make a 3 gauge. All they needed were 10 pre-orders before they would make up the mold. LOST members failed miserably with only 3 pre orders placed, so they canceled it and refunded the money. Well that sucks!!! If I would have known, you would have had one more : ) |
|
| Author: | KJ/toy [ Thu May 29, 2014 2:14 pm ] |
| Post subject: | Re: EGT, Boost,Trans temp gauges |
I'm right in the middle of adding an A pillar gauge pod and the gauges. Can any body tell me what size screws I need to attach the pod to the A pillar? I wanted the three pod also. |
|
| Author: | mtbdemon [ Fri May 30, 2014 12:23 am ] |
| Post subject: | Re: EGT, Boost,Trans temp gauges |
KJ/toy wrote: I'm right in the middle of adding an A pillar gauge pod and the gauges. Can any body tell me what size screws I need to attach the pod to the A pillar? I wanted the three pod also. I would be interested in seeing your setup after you are done |
|
| Author: | ArmyChief [ Mon Dec 22, 2014 12:06 pm ] |
| Post subject: | Re: EGT, Boost,Trans temp gauges |
WWDiesel wrote: I too am running a 3 gauge "A" pillar setup with boost, EG temp before turbo, and trans temp on my Dodge Cummins. Would love to have the same setup on my Jeep CRD. I am supprised no one makes a 3 gauge "A" pillar gauge pod for our KJ's.... Sasquatch Motor Sports makes the vent pod unit for the Glowshift 3-in-1 now  I'm installing this week!
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|