It is currently Tue Oct 07, 2025 6:12 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: JBA UCA's what's the difference between generations?
PostPosted: Wed Jun 18, 2014 2:39 pm 
Offline
LOST Member

Joined: Fri Feb 01, 2013 2:06 pm
Posts: 197
Location: Captain Cook, Hawaii
I keep reading about JBA UCA's that are 4.5 or 3.5, etc. Is this the generation, or a lift size, or what?

How do I tell the difference. A local wrecking yard has a set but aside from the fact that they have replaceable ball joints and came out of a KJ, I don't know how to tell what I'm looking at.

Thanks,

_________________
2005 Liberty Sport CRD
Cleaned MAP sensor, ORM, ELM327 Bluetooth OBDII reader with Torque Pro, USA Spec PA-11CHR iPod adapter (used Aux input for Pandora!)
Awaiting install: EVIC, air cleaner hose, and Saikou Michi Catch Can (like a Provent)

Did you hear about the guy who was hooked on brake fluid?
He swears he can stop any time.


Top
 Profile  
 
 Post subject: Re: JBA UCA's what's the difference between generations?
PostPosted: Wed Jun 18, 2014 9:35 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
Round screw in style ball joints are Gen I-III,Bolt on type(4 bolts) ball joint is GEN 4+


Top
 Profile  
 
 Post subject: Re: JBA UCA's what's the difference between generations?
PostPosted: Wed Jun 18, 2014 10:42 pm 
Offline
LOST Member

Joined: Fri Feb 01, 2013 2:06 pm
Posts: 197
Location: Captain Cook, Hawaii
Thanks TJKJ,

I actually wrote to Marlin Gehman and asked him. He said much the same and also noted that there is a difference between the JBA UCA for a stock suspension Liberty and the JBA UCA for a lifted Liberty. They rotate the ball joint a little more in one direction for the lifted version.

He said if I planned to lift the jeep, I should not get the 'stock' JBA UCA.

From the photos on the website, however, I don't see a difference...in fact I think they use the same photo for both products.

See below:
http://jeepinbyal.com/products/jeep-liberty-kj-stock-upper-a-arms?inf_contact_key=cdc577d6aca92f67c001670e16fc342b0d89a7f12e69bc73b64d95727c0ec7bd
and
http://jeepinbyal.com/collections/jba-upper-control-arms-kj/products/jeep-liberty-kj-upper-a-arms?inf_contact_key=cdc577d6aca92f67c001670e16fc342b45ca7d1807e3c0759725085550380807

_________________
2005 Liberty Sport CRD
Cleaned MAP sensor, ORM, ELM327 Bluetooth OBDII reader with Torque Pro, USA Spec PA-11CHR iPod adapter (used Aux input for Pandora!)
Awaiting install: EVIC, air cleaner hose, and Saikou Michi Catch Can (like a Provent)

Did you hear about the guy who was hooked on brake fluid?
He swears he can stop any time.


Top
 Profile  
 
 Post subject: Re: JBA UCA's what's the difference between generations?
PostPosted: Thu Jun 19, 2014 8:30 pm 
Offline
LOST Member

Joined: Fri Feb 01, 2013 2:06 pm
Posts: 197
Location: Captain Cook, Hawaii
Turns out the stock replacement JBA UCA's ball mounts are in line with the tubes. The 'lifted' JBA UCA's ball mounts are slightly kinked at the attachment point.

Get a photo from the side and it's easy to see the difference!

_________________
2005 Liberty Sport CRD
Cleaned MAP sensor, ORM, ELM327 Bluetooth OBDII reader with Torque Pro, USA Spec PA-11CHR iPod adapter (used Aux input for Pandora!)
Awaiting install: EVIC, air cleaner hose, and Saikou Michi Catch Can (like a Provent)

Did you hear about the guy who was hooked on brake fluid?
He swears he can stop any time.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 94 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com