Hey guys,

I've been tracing a bearing squeal for a while and I finally found the source couple months ago. It's the fuel pump. Every other bearing is new, and I also listened it with the mechanical stethoscope (the closes proximity on fuel pump closed to the pump pulley).

The question is, how hard is to replace it and if anybody has a part number? Did anybody have a similar issue? Don't remember reading anything regarding this topic...

Thanks a lot!

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.

I've got nothing to help. Are you talking about the injection pump?

_________________
2006 Jeep Liberty CRD 142,000 miles New engine 2-2014, Green Eco tune, FS2500 bypass filter Weeks elbow, European Torque converter, brakes front UCA's wheel bearing and front hubs. Front hitch OEM lift pump
98 K2500 Suburban 6.5td
96 K1500 " 6.5td
95 2 door Tahoe 6.5td
94 K3500 cc srw 5 speed 6.5td
91 International Model 6 speed spicer 4700

Yes, injection pump. I'm thinking to buy one, then once the old is out from the jeep, thinker about that troublesome bearing...

You guys have a good source?

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.

For a pump or bearing? If bearing look up BDI, there main hub is by you. Just take the bearing to them.

_________________
05 Liberty Limited CRD, converted to KPA 2863 ball bearing and billet turbo, 50hp injectorsl, complete egr delete, cooling fan delete, weeks intake kit, cummins in tank lift pump, ARP studs, 3" turbo back exhaust, samcos, etecno plugs, GDE trans tune, custom GDE engine tune.

Good idea, thanks!

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.