Hey guys just wanted to let everyone know I'm selling my GDE tool. It is used but only once so it's brand new. GDE sells them for 185 I believe so offer me a fair price on it if your interested. For the right price I will include shipping (obviously standard cheap takes 7 days to get to you shipping) if you need it sooner we can negotiate something. I also have a few things left over I don't need. Intake air temp sensor, mass air flow sensor, and brand new from the dealer never installed transmission cooler lines. Not sure on prices yet but send me a pm. Shipping on the tranny lines will be a little spendy I would assume because of the length and you will want to get insurance on them. I believe I payed 200 bucks for them.

_________________
OME 2790/2948 Rancho all around
JBA strut plates with clevis lift
2 extra rear upper isolators and one extra lower
Front sits 23
Rear sits 22 3/4
265 75 16 Maxxis Big Horn MT
GDE Hot Tune
Bumper trimming up front

IIRC, once you've used the flashtool on your KJ, it is locked in with your VIN and cannot be reprogrammed for a 'nuther VIN

_________________
'05 CRD Limited
Pricol EGT, Boost
GDE Hot '11; EDGE Trail switched
SEGR; Provent; Magnaflow;
Suncoast T\C, Transgo Tow'n'Go switch;
Cummins LP module, Fleetguard filter, Filterminder
2.5" Daystar f, OME r; Ranchos; K80767's, Al's lifted uppers
Rubicons, 2.55 Goodyears
Four in a row really makes it go

Maybe correct that it's tied to your vehicle's VIN if and only if you used it to upload or download a tune. If all you did was read codes it's not tied to the VIN.

If it's tied to the VIN I believe Kieth can untie it for a modest fee.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Can Keith unlock the tool? I was not aware of this.

_________________
OME 2790/2948 Rancho all around
JBA strut plates with clevis lift
2 extra rear upper isolators and one extra lower
Front sits 23
Rear sits 22 3/4
265 75 16 Maxxis Big Horn MT
GDE Hot Tune
Bumper trimming up front

If the folks at GDE would be so kind as to un-lock it, I'd take it off your hands for sure....

_________________
Share your ideas freely at https://www.facebook.com/groups/libertydiesels/

Sorry I haven't responded lately. Work has been crazy. Everything is still for sale and it sounds like Keith can erase the vin. If interested in anything pm me please.

_________________
OME 2790/2948 Rancho all around
JBA strut plates with clevis lift
2 extra rear upper isolators and one extra lower
Front sits 23
Rear sits 22 3/4
265 75 16 Maxxis Big Horn MT
GDE Hot Tune
Bumper trimming up front

check your pm

_________________
2005 Jeep Liberty CRD 2.8L 179,xxx mi. 2nd owner 8/2012
Daily Driver, full factory skids/hitch
GDE Hot Tune, GDE Trans Tune, ARP Studs, Timing Belt/Rockers done at 123,730
Weeks Intake, Samco hoses, 2nd gen fuel head, EHM, Fumoto 102, Mobil 1 5W-40 TDT-oil, M1-301, Inline 195 T-stat, GX3123 7V Steel
Jeep = Just Empty Every Pocket

Sold?