LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Cylinder Head Removal Tool List
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=80405		 Page 1 of 1
Author:  Jeepola [ Tue Oct 14, 2014 5:44 pm ]
Post subject:  Cylinder Head Removal Tool List
hi there,

My Diesel mechanic friend is traveling my way soon, to help me with my CRD.

Can someone point me to the tool List needed for the cylinder Head Removal?

Thanks.
Author:  ATXKJ [ Tue Oct 14, 2014 7:33 pm ]
Post subject:  Re: Cylinder Head Removal Tool List
if you go through the writeups
you should need the 3 alignment pins and something to hold the torque on the camshaft gear bolts.


Beesville timing belt writeup
http://www.beesvillebeefarm.com/jeep.html

Sir Sam writeup
http://colorado4wheel.com/content/KJ_TB.html

there are a couple more floating around too - I havent' bookmark'ed them


the alignment pins - can be made -or ordered

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=845491#p845491

England
http://www.amp-starters.co.uk/Setting-&-Locking-Tools/Chrysler-Locking-Tools/Sealey-VSE5056---Diesel-Engine-Timing-Kit---ChryslerLDV-2.5CRD---Belt-Drive/p-3507-3541-34574/

China
http://www.aliexpress.com/item/Diesel-Engine-Timing-Tools-Kit-For-Chrysler-LDV-2-5CRD-Belt-Driv-Eningine-Tools-PT1175/2025764528.html

or a US version
http://shopfreedomracing.com/Intake-Exhaust-Camshaft-Locking-Pin-Set-VM1052-VM1053-Alt-ST-136.htm?categoryId=-1


and if you're pulling the head - I'd put ARP in when it goes together.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=763212#p763212
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/