LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
ETECNO 7V Glow Plugs Old and New http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=80534 |
Page 1 of 1 |
Author: | 1stepp [ Fri Oct 31, 2014 4:51 pm ] |
Post subject: | ETECNO 7V Glow Plugs Old and New |
After replacing the GPs with ETECNOs earlier this year, I have just finished replacing them all after each one (except one) throwing codes. When the 3rd threw a code, Greg at IDParts said I could just replace the last original ETECNO as well. All the replacements do look different from the original ETECNOs so I hope that's a good sign The newer one (bottom) has a larger tip diameter and less distance between the tip and the shoulder. I'm hoping this design change does the trick. So glad I've got the intake elbow installed. I still have to remove it to access #3 but sooo much easier. ![]() |
Author: | greiswig [ Fri Oct 31, 2014 5:30 pm ] |
Post subject: | Re: ETECNO 7V Glow Plugs Old and New |
Great. Mine are the old style, apparently. Had them for over a year without issue, but I gather I am on borrowed time? |
Author: | DOC4444 [ Fri Oct 31, 2014 7:20 pm ] |
Post subject: | Re: ETECNO 7V Glow Plugs Old and New |
I thought the Weeks elbow makes it so you do not have to remove anything to change all the glow plugs. DOC |
Author: | 1stepp [ Fri Oct 31, 2014 8:31 pm ] |
Post subject: | Re: ETECNO 7V Glow Plugs Old and New |
Well I couldn't quite get to #3 unless I dropped the flange. So much easier than with the stock elbow but I did have to get another gasket. Someone who is more talented or has a better tool kit may be able to do it. |
Author: | 1stepp [ Fri Oct 31, 2014 8:34 pm ] |
Post subject: | Re: ETECNO 7V Glow Plugs Old and New |
greiswig wrote: Great. Mine are the old style, apparently. Had them for over a year without issue, but I gather I am on borrowed time? If you've had them that long you may be OK. My 1st one dropped off after about 2 months. Hopefully I'm set for awhile and have a good starting winter. Last winter, I had to use the block heater or it wouldn't start without a fight and a lot of black smoke. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |