It is currently Wed Nov 19, 2025 10:19 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Looking for complete list of all hoses for coolant on 2.8l
PostPosted: Mon Nov 03, 2014 10:32 am 
Offline
LOST Newbie

Joined: Mon Sep 22, 2014 3:31 pm
Posts: 47
Location: West Allis area / Northwoods
Hello, Looking for complete list of all hoses for coolant on 2.8l crd.

Been thru the manuals and all the search results looking for a complete list
of all hoses that have coolant going thru them.
Sizes, locations, clamp size.
Can bulk hose be used or are they formed?

Hopefully between all the members we can compile a complete list.
Please add to list, just listed what was there but feel theres more.

upper raditor hose formed
lower raditor hose formed
inlet heater hose
outlet heater hose
egr cooler inlet hose
egr cooler outlet hose
radiator to reservse tank?


Top
 Profile  
 
 Post subject: Re: Looking for complete list of all hoses for coolant on 2.
PostPosted: Mon Nov 03, 2014 12:01 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun Mar 28, 2010 9:15 am
Posts: 5431
Location: Tallahassee, Florida
For what it's worth
1. radiator - lower Gates 23071 and upper 22022
2.tstat to viscous heater - tight turns so may be limited to OEM but it's possible you could take the hose to say NAPA and match something or a segment of something.
3. viscous heater to cabin heater and return, lines across to EGR, from block to EGR, from tstat to coolant tank, etc - nothing special just regular heater hose of appropriate diameter.
4. hoses to/from water pump and oil cooler (just in front of turbo) might be curved enough to have to do the same as in #2 above.
5. 2 EGR cooler hoses can be replaced with appropriate heater hose. NOTE as far as I know these are the only coolant hoses that have shown a tendency to fail

Clamps - cannot be of much help other than to say for every hose you replace toss the OEM spring clamps, as they lose tension over time, in favor of stainless steel worm or "T" clamps.

Diesel coolant hoses especially of modern materials are much less likely to fail than gas engine hose back in the "older" days.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs


Top
 Profile  
 
 Post subject: Re: Looking for complete list of all hoses for coolant on 2.
PostPosted: Thu Nov 06, 2014 8:07 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Jul 29, 2008 6:34 pm
Posts: 2543
Location: America
This might have all the hoses?

http://www.idparts.com/catalog/index.ph ... 0d04f0c825

_________________
2006 LTD Bright Silver loaded with all the needed mods, CCV intact.
Proudly supporting CRD vendors, and their development of quality parts and accessories.
Equipped with HDS thermostat, plenty of heat, faster warm-ups, increased fuel mileage.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 37 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com