I’m in a pickle with a 2007 Cummins 2500. What hardware is required to read/write a vin and see all the modules in my 2005 Liberty/2007 Cummins. Chrysler specific is ok. Thanks.

_________________
2005 Silver Liberty CRD
Provent, 3.7 intake, K+N filter
ARP studs, Hemi pu tcm
In tank harness/fuel pump
Airtex rear bag, Fujimoto valve
Upgraded lifters, exhaust valves, fuel head
Florida torque converter, ID trans pump
Transgo shift kit, GM fan
2 micron filter, Bilstein shocks
Viscous heater delete

Chrysler DRBIII if you can find a good used one, they are quite expensive!

Any of the high end scanners like a SnapOn Verus Pro, a ThinkTool Pro, etc...or one of the others that can perform Bi-directional functions and ECM coding.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve