| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| cam shaft removal http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=81154 |
Page 1 of 1 |
| Author: | AndrewCRD [ Tue Jan 20, 2015 11:52 pm ] |
| Post subject: | cam shaft removal |
How in gods name do you remove those things ? I looked at the manual and it shows a seal, snap ring and crush washers. Right now I don't see anything to let me take out the seal. Any ideas ? pictures maybe ? |
|
| Author: | papaindigo [ Wed Jan 21, 2015 7:40 am ] |
| Post subject: | Re: cam shaft removal |
Instructions are available in Section 9 of the 06 FSM available at http://colorado4wheel.com/manuals/Jeep/KJ/ For comment on seal removal see viewtopic.php?f=5&t=80921&p=852959&hilit=camshaft#p852959 |
|
| Author: | AndrewCRD [ Wed Jan 21, 2015 4:09 pm ] |
| Post subject: | Re: cam shaft removal |
funny that is from my first post  but the tool specified in there is basically what im looking for. The tool actually has a diagram on how its supposed to be used. Now I have a pretty clear picture of what im trying to do to get that out. Alternatively Ive sourced a seal puller tool locally ... basically looks like a pick. |
|
| Author: | papaindigo [ Wed Jan 21, 2015 4:39 pm ] |
| Post subject: | Re: cam shaft removal |
Essentially the Lisle tool is a fancy pry bar or pick and might be good enough to pull a good seal so it can be reused as opposed to using a thin screwdriver and something for a fulcrum to lever it out. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|