4 of them are handy for pulling the short-block out of the jeep
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Head gasket for CRD http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=81442 |
Page 1 of 1 |
| Author: | tomasnc [ Fri Feb 27, 2015 9:43 am ] |
| Post subject: | Head gasket for CRD |
From all the searching I've done the VM head gasket is available OEM only and its shipped with head bolts too? Thanks, Tom |
|
| Author: | amslube [ Fri Feb 27, 2015 12:05 pm ] |
| Post subject: | Re: Head gasket for CRD |
I purchased mine from ID parts, but opted for the entire kit which included the head gasket w/bolts, intake, exhaust, turbo, and thermostat gaskets, fuel injector crush washers and o-rings, exhaust manifold and turbo nuts. I also purchased the turbo return gasket and rubber grommet for turbo return oil at the block. Oh yes, ARP studs. |
|
| Author: | flman [ Fri Feb 27, 2015 6:44 pm ] |
| Post subject: | Re: Head gasket for CRD |
Yep, comes with the bolts, they look like the would be useful to put into a telephone pole for climbing. I just keep mine around for welding projects just in case. |
|
| Author: | Mountainman [ Fri Feb 27, 2015 6:57 pm ] |
| Post subject: | Re: Head gasket for CRD |
4 of them are handy for pulling the short-block out of the jeep
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|