It is currently Wed Apr 24, 2024 7:26 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: CODE U0415
PostPosted: Fri Feb 27, 2015 5:20 pm 
Offline
LOST Member

Joined: Tue Jun 01, 2010 8:47 am
Posts: 191
Just pulled codes off my libby. The normal egr, and maf. U0415 Invalid Date Received From Anti-Lock Brake System Control Module.

Anyone had this code? I'm 100% sure i need a new wheel bearing/hub on the passenger front. I actually have for both pass. and driver side. But its been so cold i haven't been able to put them on. I'm hoping the weather forecast is correct and i can tackle it on wed. I just wanted to know if that code could be something else?

_________________
06 crd, straight pipe, EHM,
99 f250 7.3l powerstroke sled puller, All kinds of goodies.
79 2.3 turbo mustang hatch
88 5.0 vert (blown, but soon to be TT stroker)
66 f100 project.
01 cbr 929rr


Top
 Profile  
 
 Post subject: Re: CODE U0415
PostPosted: Sat Feb 28, 2015 1:03 pm 
Offline
LOST Member

Joined: Tue Jun 01, 2010 8:47 am
Posts: 191
Just a follow up. I swapped out the passenger side hub this morning after work. Nothing beats working outside in the driveway when its 8-10 degrees because the garage is full of projects that can't be moved easily. lol

Anyway the bearing was completely open in the rear and it had a huge amount of play. I have no way of resetting the ABS lights but hopefully that was the problem. I'll swap the drivers side out when its a little nicer hopefully weds.

Any way other than the dealer to reset the ABS light?

_________________
06 crd, straight pipe, EHM,
99 f250 7.3l powerstroke sled puller, All kinds of goodies.
79 2.3 turbo mustang hatch
88 5.0 vert (blown, but soon to be TT stroker)
66 f100 project.
01 cbr 929rr


Top
 Profile  
 
 Post subject: Re: CODE U0415
PostPosted: Sat Feb 28, 2015 1:17 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun Mar 28, 2010 9:15 am
Posts: 5431
Location: Tallahassee, Florida
I suspect there is a decent chance that a good brake shop would have a code reader that can clear the code. On the other hand this may be one of those codes that goes away on its own after like 5 drive cycles after the problem that caused the code is fixed.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs


Top
 Profile  
 
 Post subject: Re: CODE U0415
PostPosted: Sat Feb 28, 2015 1:20 pm 
Offline
LOST Member

Joined: Tue Jun 01, 2010 8:47 am
Posts: 191
papaindigo wrote:
I suspect there is a decent chance that a good brake shop would have a code reader that can clear the code. On the other hand this may be one of those codes that goes away on its own after like 5 drive cycles after the problem that caused the code is fixed.


Thanks. I'll try to reset it with the torque app but i doubt it will work. I'll see if it will go away.

_________________
06 crd, straight pipe, EHM,
99 f250 7.3l powerstroke sled puller, All kinds of goodies.
79 2.3 turbo mustang hatch
88 5.0 vert (blown, but soon to be TT stroker)
66 f100 project.
01 cbr 929rr


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 48 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com