| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Heated leather seats. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=81574 |
Page 1 of 1 |
| Author: | Klem531 [ Sat Mar 14, 2015 12:01 pm ] |
| Post subject: | Heated leather seats. |
Good morning fellow CRD'ers. I have an 06 crd with cloth interior.. I've just stumbled across a full set of heated leather seats from an 06 in really good shape. Can anyone tell me if the wiring for the heated leather exists in all the jeeps or is it something I would need to add? Thanks |
|
| Author: | papaindigo [ Sat Mar 14, 2015 2:19 pm ] |
| Post subject: | Re: Heated leather seats. |
Are your current seats manual or power without heat. IIRC you will have to swap the passenger side airbag sensor that's under the seat. |
|
| Author: | Klem531 [ Sat Mar 14, 2015 3:11 pm ] |
| Post subject: | Re: Heated leather seats. |
I have the sport so no power no nothin on the seats . Lol |
|
| Author: | papaindigo [ Sat Mar 14, 2015 3:26 pm ] |
| Post subject: | Re: Heated leather seats. |
Best I can say then is you will need to get power to the seat. I personally do not know how but it can be done. Hopefully someone who know how will weigh in but in the interim the FSMs at http://colorado4wheel.com/manuals/Jeep/KJ/ have somewhat usable wiring diagrams. |
|
| Author: | mass-hole [ Tue Mar 17, 2015 10:28 am ] |
| Post subject: | Re: Heated leather seats. |
I believe there are wiring differences between heated and non heated, and if you have power nothing seats im not sure. From what I remember when I was looking people had to manually rewire some of the harnesses and make a custom cross over setup from the drivers to the passenger side to power that seat. It would be nice if you could pull the full harness from the donor vehicle. Edit: To expand on what I said, the FSM states that there is only one heated seat control module which is located under the drivers side seat. I belive this is why you need to wire from the drivers seat over to the passenger seat as the actual control is in the drivers side. |
|
| Author: | thermorex [ Tue Mar 17, 2015 11:43 am ] |
| Post subject: | Heated leather seats. |
Out of curiosity, do you need leather seats because of the premium look, or just to have heated seats. If last, there are heated 12v blankets that are made to be installed under the seat cloth, with switches, heat levels, etc, so it may be easier to just do that. You'll need a relay (preferably) per blanket and few hours of work. I added heating on my jeep cloth seats, very easy to do, but I one don't like leather seats. |
|
| Author: | gmctd [ Tue Mar 17, 2015 2:51 pm ] |
| Post subject: | Re: Heated leather seats. |
mass-hole wrote: I believe there are wiring differences between heated and non heated, and if you have power nothing seats im not sure. From what I remember when I was looking people had to manually rewire some of the harnesses and make a custom cross over setup from the drivers to the passenger side to power that seat. It would be nice if you could pull the full harness from the donor vehicle. Edit: To expand on what I said, the FSM states that there is only one heated seat control module which is located under the drivers side seat. I belive this is why you need to wire from the drivers seat over to the passenger seat as the actual control is in the drivers side. Yeah, because you will also need to repair post haste to yer local dealer to have the premium seats option enabled in your Body Control Module, utilizing the STARSCAN programming tool |
|
| Author: | SFHLibertyCRD [ Wed Mar 18, 2015 1:47 pm ] |
| Post subject: | Re: Heated leather seats. |
From a quick google search: http://www.jeepkj.com/forum/f202/how-ad ... -kj-25651/ Different year, but may help. I don't think any reprogramming of the BCM is necessary. |
|
| Author: | mass-hole [ Wed Mar 18, 2015 2:38 pm ] |
| Post subject: | Re: Heated leather seats. |
SFHLibertyCRD wrote: From a quick google search: http://www.jeepkj.com/forum/f202/how-ad ... -kj-25651/ Different year, but may help. I don't think any reprogramming of the BCM is necessary. Yea i think the control is all self contained, you just need to wire to the proper fuses. #'s 25 and 29 I think |
|
| Author: | Klem531 [ Thu Mar 19, 2015 11:20 pm ] |
| Post subject: | Re: Heated leather seats. |
Thank you for the insight everyone.. I think I will just stick with my cloth seats... The last thing I need is another project. Lol
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|