| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| DIY tuning http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=81696 |
Page 1 of 1 |
| Author: | senatorjohn [ Sat Mar 28, 2015 8:23 am ] |
| Post subject: | DIY tuning |
Hi. Anyone had any experience with resetting the fault set condition for the inlet pressure sensor circuit? Supposed to set a fault on specific pressure difference compared to barometric pressure sensor when engine speed is below 800 rpm. If I can change the set rpm to 700 or lower in the ECU, my current fault will not activate limp mode. Performs perfectly once the fault is erased with the scan tool. John |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|