| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear Upper Control Arm....Looking for USA Made http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=82062 |
Page 1 of 1 |
| Author: | Hydraulic Jack [ Thu May 07, 2015 7:38 pm ] |
| Post subject: | Rear Upper Control Arm....Looking for USA Made |
Does anyone know of a US made rear upper control arm besides factory Mopar? Has anyone had them replace the upper (free) under the lower control arm recall? HJ |
|
| Author: | thermorex [ Thu May 07, 2015 8:28 pm ] |
| Post subject: | Re: Rear Upper Control Arm....Looking for USA Made |
I believe that what Napa sells is made in USA, at least this is what I remember when I got mine. |
|
| Author: | flash7210 [ Thu May 07, 2015 9:14 pm ] |
| Post subject: | Re: Rear Upper Control Arm....Looking for USA Made |
Are you talking about the boomerang that goes above the rear axle? JBAoffroad.com has one for about $160 |
|
| Author: | Hydraulic Jack [ Thu May 07, 2015 9:19 pm ] |
| Post subject: | Re: Rear Upper Control Arm....Looking for USA Made |
Yes the bomerang...I'm looking for US made..the one at JBAoffroad.com is crown....(china crap)..HJ |
|
| Author: | thermorex [ Thu May 07, 2015 9:48 pm ] |
| Post subject: | Re: Rear Upper Control Arm....Looking for USA Made |
Some mechanics call it wishbone... Check Napa, if I'm not going nuts, should be us made. |
|
| Author: | Hydraulic Jack [ Fri May 08, 2015 4:42 pm ] |
| Post subject: | Re: Rear Upper Control Arm....Looking for USA Made |
NAPA couldn't tell me one way or the other....Went with OEM....HJ |
|
| Author: | kayaker2 [ Sat May 09, 2015 12:15 pm ] |
| Post subject: | Re: Rear Upper Control Arm....Looking for USA Made |
Hydraulic Jack I just replaced mine with the Mopar from Rock Auto part number 52088901AD $ 355.32 to my door. Had Mopar tags maybe the same one from Morris 4X4 Has the Mopar #52088901AD-M No clunking now only from the trailer hitch and receiver. Kayaker2 |
|
| Author: | WWDiesel [ Sat May 09, 2015 1:35 pm ] |
| Post subject: | Re: Rear Upper Control Arm....Looking for USA Made |
Bought a Raybestos brand unit upper rear Professional Grade Control Arm and Ball Joint Assembly off Amazon early last year. I believe they are made in USA. Looked to be an exact replacement of the OEM unit. Even had the same exact stamped markings.... 
|
|
| Author: | CATCRD [ Sat May 09, 2015 5:44 pm ] |
| Post subject: | Re: Rear Upper Control Arm....Looking for USA Made |
WWDiesel wrote: Bought a Raybestos brand unit upper rear Professional Grade Control Arm and Ball Joint Assembly off Amazon early last year. I believe they are made in USA. Looked to be an exact replacement of the OEM unit. Even had the same exact stamped markings.... I think Mountainman found the Raybestos was Taiwan made. Anyway, that's how they do it. They'll copy it whether it's a dent or a date stamp! |
|
| Author: | BD Williamson [ Mon May 11, 2015 12:50 pm ] |
| Post subject: | Re: Rear Upper Control Arm....Looking for USA Made |
Go to the other Liberty Site and look at the IRO WJ post, I believe that is what you are looking for. |
|
| Author: | ATXKJ [ Mon May 11, 2015 7:31 pm ] |
| Post subject: | Re: Rear Upper Control Arm....Looking for USA Made |
WhitbyKJ is here too http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=81761 but it's still in development otherwise Mopar or Chinese, I don't think there are any other options. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|