Anyone using a PML diff cover? Any issues?

http://www.yourcovers.com/diffcover_9864.php

_________________
2006 CRD Sport
GDE FT ECO tune, GDE TCM ECO tune, ARP studs, HDS-001 203F T-Stat, 3.7L nylon fan & Hayden 2905 clutch, Carter P76148M in-tank pump, Racor 245R122 filter head & 2 micron R25S fuel filter, Provent 200, Samcos, Fumoto F-102, Litens 920834A de-coupler, PML rear diff cover, OEM trans pan with welded in bung, JBA UCAs, full skids.

I like mine, no issues

_________________
05 CRD: H.D.S2 stat,WW Ironrock trilink&LCA's, OX rear,ARB front, 4.10's, ARB bumper, Suncoast,OME 3.5, JBA UCA,rock rails, Moabs&265/75 Duratracs, GDE tunes ,FFD fan,ARP's, 2 micron fuel, new valves,sasquatch battery tray & grid heater, tensioner relocated
Mech fan, VH & AC delete

I have diff and trans pans on the GMC for going on 8 years with no issues or complaints. They took powder coating really well and it too is holding up great.

_________________
2006 Liberty CRD - the commuter. GDE Full Tq Eco, Samcos, etecno GPs

2006 GMC Sierra Duramax/Allison - the toy
RIP - 1995 Tahoe 6.5 TD
1990 JD 332, yep, the mower is a diesel too

Thanks Mountainman and minisub. I will order one.

_________________
2006 CRD Sport
GDE FT ECO tune, GDE TCM ECO tune, ARP studs, HDS-001 203F T-Stat, 3.7L nylon fan & Hayden 2905 clutch, Carter P76148M in-tank pump, Racor 245R122 filter head & 2 micron R25S fuel filter, Provent 200, Samcos, Fumoto F-102, Litens 920834A de-coupler, PML rear diff cover, OEM trans pan with welded in bung, JBA UCAs, full skids.

For that price, you might want to consider a G2. This is offered in a version that provides extra support for the carrier bearings and a dip stick, along with temp sender port. Very happy with ours.

DOC

_________________
2005 KJ CRD Ltd Detroit TrueTrac Bilsteins G2 GDE "HOT" ECU GDE TCM "Tow Tune" "euro" TC SEGR Weeks Elbow New HG at 130K ARPs Clean CAT aFe Filter Magnaflow Exhaust EHM Cumminos In-Tank Lift Pump Hayden Fan Clutch Nylon Fan VH Enabled with GDE lower shutoff point Recalibrated Temp Gauge Tekonsha Prodigy Sears P-1 ZDDP

I looked at the G2 and the Nitro differential covers, also. I prefer the design of the PML cover. It has a side fill. You add gear oil until it runs out......like the factory cover. No guessing.

_________________
2006 CRD Sport
GDE FT ECO tune, GDE TCM ECO tune, ARP studs, HDS-001 203F T-Stat, 3.7L nylon fan & Hayden 2905 clutch, Carter P76148M in-tank pump, Racor 245R122 filter head & 2 micron R25S fuel filter, Provent 200, Samcos, Fumoto F-102, Litens 920834A de-coupler, PML rear diff cover, OEM trans pan with welded in bung, JBA UCAs, full skids.

I installed the PML rear diff cover yesterday. The side fill hole makes it is much easier to add gear oil to the diff than the factory cover. It can be filled from a quart sized gear oil bottle without using a pump or a hose. The drain plug will make oil changes much easier in the future. Oil capacity has increased to 3.25 quarts.

_________________
2006 CRD Sport
GDE FT ECO tune, GDE TCM ECO tune, ARP studs, HDS-001 203F T-Stat, 3.7L nylon fan & Hayden 2905 clutch, Carter P76148M in-tank pump, Racor 245R122 filter head & 2 micron R25S fuel filter, Provent 200, Samcos, Fumoto F-102, Litens 920834A de-coupler, PML rear diff cover, OEM trans pan with welded in bung, JBA UCAs, full skids.

hey Doc, or anyone else that might know the answer. will the g2 fit with the factory gas tank skid plate